Controlling your soundbar with your Cox remote makes watching TV much easier. You won’t need to switch between remotes to adjust the volume or power. This guide provides clear, step-by-step instructions to program your Cox remote to work with your soundbar. It works for most Cox remote models, including Contour, Contour 2, and XR15, and supports popular soundbar brands like Bose, Sony, Vizio, LG, and Samsung.
Step-by-Step Guide to Programming Your Cox Remote
Follow these steps to program your Cox remote to your soundbar. The process is simple and should take only a few minutes.
Step 1: Identify Your Remote and Soundbar
Before you start, confirm your Cox remote model and soundbar brand. This ensures you use the correct programming steps and code.
- Check your Cox remote: Common models include Contour, Contour 2, and XR15. Find your model on the Cox Remote Control User Guides page or in your remote’s manual.
- Note your soundbar brand: Popular brands include Bose, Sony, Vizio, LG, Samsung, and others.
Step 2: Find the Correct Remote Code
Each soundbar brand has specific codes that allow your Cox remote to control it. You can find these codes on the Cox website.
- Visit the Cox Remote Control User Guides page.
- Look for your soundbar brand and write down the listed codes.
- If your brand isn’t listed, use the code search feature on your remote. Check your remote’s user guide for instructions.
Step 3: Program the Remote
With the code ready, program your remote to control your soundbar. Here’s how:
- Turn on your soundbar.
- Find the device key on your Cox remote. It’s usually labeled “Audio” or “Soundbar.”
- Press and release the device key.
- Press and hold the Mute and Select buttons together until the device key blinks twice, then release both buttons.
- Enter the first four-digit code for your soundbar using the number pads.
- Press the Power button to test if the soundbar turns off. If it does, the code is correct and saved.
- If it doesn’t work, repeat steps 3–6 with the next code for your brand.
- If no codes work, check the “Searching for Your Code” section in your remote’s user guide or on the Cox Remote Control User Guides page.
Contour 2 Voice Remote Instructions
The Contour 2 Voice Remote may automatically detect your soundbar if connected to the Set-Top-Box. If it doesn’t, program it manually:
- Turn on your soundbar.
- Press and hold the SETUP button until the LED turns green.
- Enter the code for your soundbar from the CodeFinder tool on the Cox Remote Control User Guides page.
- Test the volume control. If it doesn’t work, try the next code.
Ensure a clear line of sight between the remote and soundbar. Check that the batteries are fresh if the LED doesn’t blink.
Step 4: Test Your Setup
After programming, test the remote to confirm it works:
- Press the volume up/down buttons to adjust the soundbar’s volume.
- Press the power button to turn the soundbar on and off.
- If some functions don’t work, try another code or refer to the troubleshooting section.
Troubleshooting Common Issues
If your remote doesn’t control your soundbar, try these solutions:
| Issue | Solution |
|---|---|
| Wrong code | Double-check the code for your soundbar brand. Try the next code listed. |
| Interference | Ensure no obstacles block the remote’s signal to the soundbar. |
| Low batteries | Replace the remote’s batteries with fresh ones. |
| Remote not responding | Reset the remote. Check your user guide for reset instructions. |
| Persistent issues | Visit the Cox Remote Troubleshooting page or call Cox support at 1-866-867-7644. |
Additional Tips for Success
- Multiple devices: If you control a TV and soundbar, program each device separately. Some remotes support multi-device control—check your user guide.
- Universal remote option: If programming is complex, consider a universal remote like Logitech Harmony for easier control of multiple devices. Learn more at Codes for Universal Remotes.
- Check manuals: Refer to your remote and soundbar manuals for model-specific instructions.
- Set soundbar as default: Some remotes default to TV volume control. Ensure the soundbar is set as the audio device, especially for Contour 2 Voice Remote users.
Get The Code For Your Soundbar
If you’re having trouble finding the code for your soundbar, don’t worry – we’ve got you covered. Head to our website or simply visit the link Here and use our search tool to find the code for your specific brand and model of soundbar. Simply enter the brand and model number in the search field, and our tool will provide you with the code you need to program your Cox remote.
Alternatively, you can also check the manual for your soundbar or search online for the code. There are a number of online resources that provide lists of codes for different brands and models of soundbars.
Once you have the code, you can follow the steps outlined above to program your Cox remote to control your soundbar. With the right code and a little bit of patience, you’ll be able to easily adjust the volume and change the input source using your Cox remote.
Conclusion
Programming your Cox remote to your soundbar is a simple way to streamline your entertainment setup. Follow these steps to control your soundbar’s volume and power with ease. If you run into issues, use the troubleshooting tips or contact Cox support at 1-866-867-7644. Enjoy your improved audio experience!
FAQ’s
What is the code for Cox remote sound bar?
the Samsung sound bar on. When the status Indicator at the top of the remote turns from red to green, press and hold the Setup button on the remote. For your audio device, enter the 4- or 5-digit code. The Samsung sound bar’s most likely codes are 31868, 31950, 32660, 31949, 32137, and 31304.
How do I sync my soundbar to my TV remote?
On your Samsung TV, use the remote to scroll to Settings, pick Sound, and then pick Sound Output. After choosing your Samsung soundbar, click Close. Now you can silence the soundbar and change the volume using the TV remote. Together with the TV, the soundbar should include an on/off switch.
Why won’t my remote control my soundbar?
If your remote isn’t responding even with your soundbar, you must turn off the audio device on its power button. Once the soundbar is off, remove the power cable and wait between 5 to 10 minutes before plugging it back on.