Sanyo DVD Player Remote Codes: A Comprehensive Guide

Losing your Sanyo DVD player remote or wanting to use a universal remote can be frustrating. This guide provides a complete solution with up-to-date remote codes and clear instructions to program your universal remote. We also cover troubleshooting tips, how to buy a replacement remote, and how to use your DVD player without a remote. Written in simple language, this article is designed to help you get your Sanyo DVD player working smoothly. All information is current as of June 2025, based on reliable sources.

List of Sanyo DVD Player Remote Codes

Below are the most common 4-digit remote codes for Sanyo DVD players:

Sanyo DVD Player Universal Remote 4 Digit Codes

2050	0896
0873	1919
0790	0695
0670	2393

Sanyo DVD Player Universal Remote Codes For One For All

• 0896
• 0670

Sanyo DVD Player Universal Remote Codes For RCA

• 3359
• 3508
• 3518

Sanyo DVD Player Universal Remote Codes For GE

• 0904
• 0416

How to Program a Universal Remote for Sanyo DVD Player

Programming a universal remote to work with your Sanyo DVD player is straightforward using the direct code entry method. This method is the most common and works with most universal remotes. Below are the steps, adapted from general programming instructions on Lifewire.

Direct Code Entry Method

1. Turn on your Sanyo DVD player manually or using its power button.
2. Find the device button on your universal remote, usually labeled “DVD” or “Aux.”
3. Press and hold the device button until the remote’s LED light turns on or blinks.
4. Enter a 4-digit code from the list above (e.g., 0670). Use the number pad on your remote.
5. Check if the code works. If correct, the LED may blink twice, or the DVD player’s power button will respond. If not, try another code.
6. Test basic functions like power, play, pause, and stop to ensure the remote controls the DVD player properly.

Tip: Write down the working code in your remote’s manual for future reference. If your remote has an auto code search feature, you can use it as an alternative. Check your remote’s manual for specific instructions.

Auto Code Search Method

If the direct code entry doesn’t work, try the auto code search method, which is supported by many universal remotes:

1. Turn on your Sanyo DVD player.
2. Press and release the “DVD” button on your remote.
3. Press and hold the “DVD” and “Power” buttons together until the LED blinks or stays on.
4. Release the buttons and press “Play.” Wait a few seconds for the DVD player to respond.
5. Press “Reverse” every 2 seconds until the DVD player turns on.
6. Press “Stop” to save the code and test the remote’s functions.

What to Do If Codes Don’t Work

If none of the provided codes work, try these troubleshooting steps:

• Verify the model number: Codes vary by Sanyo DVD player model. Find the model number on the back or bottom of the player (e.g., FWBP706F). Check the remote’s manual or manufacturer’s website for model-specific codes.
• Try auto code search: As described above, this method can find the correct code automatically.
• Check the remote’s manual: Some remotes have additional codes or specific programming steps for Sanyo devices.
• Ensure compatibility: Confirm your universal remote supports DVD players. Older remotes (pre-2003) may not work with newer devices, as noted on Sony’s support page.
• Contact the manufacturer: Reach out to the remote or DVD player manufacturer for assistance.

If programming fails, consider purchasing a replacement remote, as discussed below.

Buying a Replacement Remote

If programming a universal remote doesn’t work, you can buy a replacement remote designed for your Sanyo DVD player. Retailers like Walmart and eBay offer remotes for models like the Sanyo FWBP706F or DVW-7200. Search using your DVD player’s model number to ensure compatibility. For example, a replacement remote for the Sanyo FWBP706F is available for around $12.99–$15.99 on Walmart.

Using the DVD Player Without a Remote

If you can’t program a remote or find a replacement, you can still use your Sanyo DVD player with its physical buttons. Most models have buttons on the front panel for basic functions:

• Power: Turn the player on or off.
• Play: Start playing a DVD.
• Stop: Pause or stop playback.
• Eject: Open the disc tray.

While less convenient, this method works for basic operation. Check your DVD player’s manual for the exact location of these buttons, as layouts vary by model.

Additional Tips and Resources

Here are some related topics to help you with your Sanyo DVD player:

• Finding the model number: Look on the back, bottom, or side of your DVD player for a label with the model number (e.g., FWBP706F).
• Troubleshooting common issues: If your DVD player doesn’t work, check for dirty discs, loose cables, or power issues. Unplug the player for 5 minutes to reset it, as suggested on JustAnswer.
• Choosing a universal remote: Look for remotes with good reviews and support for Sanyo devices, such as GE or Logitech Harmony remotes.
• Resetting your DVD player: Unplug the player for 5–10 minutes, then plug it back in to reset it.

Conclusion

This guide provides everything you need to program a universal remote for your Sanyo DVD player using common 4-digit codes like 0670, 0695, and others. If the codes don’t work, verify your model number, try auto code search, or consider a replacement remote from retailers like Walmart or eBay. As a last resort, use the physical buttons on your DVD player for basic control. With these steps, you should be able to enjoy your DVDs without hassle. For additional resources, visit our other guides on urclist.site.

FAQ’s