A universal remote simplifies your home entertainment by controlling multiple devices, like your Element TV, DVD player, or soundbar, with one device. If you have a Philips universal remote, you can program it to work with your Element TV using specific codes. This guide provides up-to-date codes, programming instructions, and troubleshooting tips to ensure your remote works smoothly. All information is accurate as of June 2025, based on official Philips documentation and trusted tech sources.
Finding the Right Code for Your Element TV
To program your Philips universal remote, you need the correct code for your Element TV. The code depends on your remote’s model and manufacturing date. For example, older models like SRU2040 use 4-digit codes, while newer models like SRP3014/27 use 5-digit codes. Check your remote’s model number on the back or in the user manual. Below is a table of codes for Element TVs:
Philips Universal Remote Codes for Element TV
| 2401 | 11068 |
| 4111 | 11568 |
| 10862 | 6021 |
| 5411 | 1091 |
| 5341 | 1651 |
| 5361 | 5471 |
| 14175 | 13656 |
| 5841 | 14023 |
| 5421 | 1918 |
| 11147 | 5831 |
| 14156 | 3477 |
How to Program Your Philips Universal Remote
You can program your Philips universal remote using two methods: Manual Code Entry or Auto Code Search. Follow the steps below for the method that suits you best.
Method 1: Manual Code Entry
This method uses a specific code from the table above to program your remote.
- Turn on your Element TV.
- Press and hold the Setup button on your Philips remote until the indicator light turns on.
- Enter the 4-digit or 5-digit code for your Element TV (e.g., 5421 for CL4 models).
- Press the TV button to save the code.
- Test the remote by pressing the Power or Volume buttons. If the TV responds, the code is correct.
Method 2: Auto Code Search
If you don’t know the correct code or want the remote to find it automatically, use this method.
- Turn on your Element TV.
- Press and hold the Setup button on your Philips remote until the indicator light turns on.
- Press and release the TV button.
- Slowly press the Power button repeatedly until your TV turns off.
- Press the TV button again to save the code.
- Test the remote by pressing the Power or Volume buttons.
Troubleshooting Common Issues
If your remote doesn’t work after programming, try these solutions:
- Remote Not Responding: Replace the batteries with fresh ones. Ensure the remote is pointed directly at the TV with no obstructions, like furniture or glass.
- Wrong Code: If the first code doesn’t work, try another code from the list. If none work, use the Auto Code Search method.
- TV Turns On but Other Functions Don’t Work: Confirm the TV button is selected on the remote. If you control multiple devices, switch between device buttons (e.g., TV, DVD).
- Inconsistent Performance: Clean the remote and TV sensors with a soft cloth to remove dust or dirt that may block the signal.
For persistent issues, check your remote’s manual or visit Philips support or Element TV support.
FAQ’s
Can you program any remote to any TV?
Your universal remote should work with your smart TV as long as it has an infrared sensor (or whatever connection type your remote uses, like Bluetooth or Wi-Fi). However, some universal remotes can only operate the power, volume, and channel up/down buttons on your TV.
Why is my Philips TV remote blinking red?
The remote control is operational if a red light is flashing. The TV could be broken. If not, it’s possible that the remote control is broken and has to be replaced.