Craig DVD Universal Remote Codes- A Complete Guide

Lost your original remote or want to control your Craig DVD player with one universal remote? You’re in the right place. This guide provides the most common universal remote codes for Craig DVD players and clear instructions to program your remote. Whether you’re new to tech or need a quick reference, this guide has everything you need. All information is based on the latest data available as of May 2025.

Finding the Right Remote Codes

Universal remote codes vary based on your DVD player’s model and your remote’s brand. To find the right codes:

• Locate your DVD player’s model number. Check the back or bottom of the device. If you can’t find it, look in the user manual or on the device’s label.
• Identify your universal remote’s brand. Brands like RCA, GE, or Sony may have different codes for the same DVD player.

Tip: If you don’t know your DVD player’s model, try the most common codes below. Many universal remotes have an auto-search feature that finds the code automatically.

Universal Remote Codes for Craig DVD Players

Below is a list of codes for Craig DVD players, organized by remote brand. These are the most common codes and should work for most models. If one doesn’t work, try another.

Craig DVD Universal Remote 4 Digit Codes

• 1036
• 1484

Craig DVD Universal Remote Codes From Different Universal Remote Brands

RCA universal remote

• 064

Sony Universal Remote

• 042
• 053

How to Program Your Universal Remote

There are three ways to program your universal remote for a Craig DVD player: Auto-Search (no codes needed), Manual Method (with codes), and Code Search Method. Follow the steps for the method that suits you.

1. Auto-Search Method (No Codes Needed)

This method is best if you don’t know the code or if the listed codes don’t work.

1. Turn on your Craig DVD player.
2. Press and hold the “DVD” button on your universal remote for about 3 seconds until the LED light flashes.
3. While holding the “DVD” button, press and release the “Power” button. The LED light should stay on.
4. Press the “Channel Up” or “Channel Down” button repeatedly until your DVD player turns off.
5. Once the DVD player turns off, press the “DVD” button again to save the code. The LED light should blink twice to confirm.

2. Manual Method (With Codes)

Use this method if you have a code from the list above.

1. Turn on your Craig DVD player.
2. Press and hold the “Setup” button on your universal remote until the LED light flashes (usually about 3 seconds).
3. Enter the 4-digit or 5-digit code from the list. For example, for code 1036, press 1, 0, 3, 6.
4. Press the “Power” button. If the DVD player turns off, the code is correct.
5. If it doesn’t work, try another code from the list.

3. Code Search Method

This is another option if you don’t know the exact code.

1. Turn on your Craig DVD player.
2. Press and hold the “Setup” button until the LED light flashes.
3. Enter the code “991” (or follow your remote’s specific instructions).
4. Hold down the “Power” button and press “Channel Up” until your DVD player turns off.
5. Release both buttons when the DVD player turns off. The remote is now programmed.

Note: Steps may vary slightly depending on your remote’s brand. Check your remote’s manual for specific instructions.

Troubleshooting

If you’re having trouble, here are common issues and fixes:

• None of the codes work: Try the auto-search method to find the right code automatically.
• Remote doesn’t respond: Check the batteries. Ensure they’re fresh and inserted correctly.
• DVD player doesn’t turn off during programming: Make sure there’s no obstruction between the remote and the player, and stay within range (10-20 feet).
• Using a code for the wrong device: Ensure you’re programming the “DVD” button, not “TV” or another device.

Additional Tips

• Test all functions: After programming, test buttons like play, stop, and menu to ensure full control.
• Keep your manual handy: Your remote’s manual may list additional codes or steps specific to your model.
• Contact support: If you’re stuck, reach out to your remote’s manufacturer or Craig’s customer service for help.

Conclusion

Programming your universal remote for a Craig DVD player is simple with the right codes and steps. Use the methods above to get your remote working quickly. If you run into issues, check the troubleshooting tips or seek further help. This guide is designed to make the process easy and help you control your DVD player with ease.

FAQs