Setting up your GE universal remote to control your GE DVD Recorder + RW is simple with the right codes and steps. This guide gives you everything you need: a full list of codes, easy programming instructions, and tips to fix common problems. It’s written in plain English so anyone can follow along, whether you’re new to tech or experienced. As of April 2025, this information is current and based on reliable sources.
Why Use a GE Universal Remote?
A GE universal remote lets you control multiple devices—like your TV, DVD player, or cable box—with just one remote. It reduces clutter and simplifies your entertainment setup. GE remotes work with many brands, including popular DVD recorders, making them a versatile choice for your home.
Finding Your Remote’s Version
GE universal remotes have different versions, such as V1, V2, CL3, or CL4. The version affects which codes work. To find your version:
- Open the battery compartment.
- Look for a sticker with the model number.
- Note the version (e.g., CL3, CL4, or none for older V1 models).
If you’re unsure, visit Jasco Support for help.
How to Program Your GE Universal Remote
Programming your GE universal remote is easy with these three methods. Start with the first if you have a code from the list above.
Method 1: Manual Code Entry
This method uses a specific code for your brand.
- Turn on your GE DVD Recorder + RW.
- Press and hold the Setup button on your remote until the red light stays on.
- Press the DVD button (or the button for your device type).
- Enter the 4-digit code (e.g., 0938 for APEX).
- If the code works, the red light will turn off. Test the remote by pressing Play or Stop.
Tip: If the first code doesn’t work, try another code for your brand.
Method 2: Automatic Code Search
Use this if you don’t have a code or want the remote to find it.
- Turn on your GE DVD Recorder + RW.
- Press and hold the Setup button until the red light stays on.
- Press the DVD button.
- Slowly press the Channel Up button until the DVD recorder turns off.
- Press Setup again to save the code.
- Test the remote to confirm it works.
Image Suggestion: Include a diagram of a GE universal remote highlighting the Setup, DVD, and Channel Up buttons for clarity.
Method 3: Code Search Without Turning Off
This method is helpful if your device doesn’t turn off during the search.
- Turn on your GE DVD Recorder + RW.
- Press and hold the Setup button until the red light stays on.
- Enter 9-9-9 to start the code search.
- Press the DVD button.
- The remote will cycle through codes. When your device responds (e.g., pauses or plays), press Setup to save the code.
Note: This method may take a few minutes, so be patient.
GE DVD Recorders + RW Universal Remote Codes List
Below is a list of codes for GE DVD Recorders + RW, organized by brand. These codes work with most GE universal remote versions (CL3, CL4, CL5, etc.):
| APEX | 0938 |
| ASPIRE | 0933 |
| BROKSONIC | 0967 |
| CENTRIOS | 0951, 1060, and 1061 |
| COBY | 0894 |
| CYBERHOME | 0939 |
| EMERSON | 0899 |
| GO-VIDEO | 0431, 0902, 0901 |
| HITACHI | 0419 |
| HUMAX | 0912 |
| ILO | 0959 |
| JVC | 0900, 1072 |
| KXD | 0894 |
| LG | 0907 |
| LITEON | 0902, 0898, 0959 |
| MAGNAVOX | [0979], [0980] |
| MEDION | 0903, 0959 |
| MEMOREX | 1050 |
| MUSTEK | 0431 |
| ORITRON | 1060 |
| PANASONIC | 0387 |
| PHILIPS | [0979], [0980] |
| PHILIPS-MAGNAVOX | [0979], [0980] |
| PIONEER | 0977, 0909, 1084 |
| POLAROID | 0385 |
| RCA | 0409 |
| SAMSUNG | 0891 |
| SANYO | 0904 |
| SELECTRON | 1080 |
| SHARP | 0897 |
| SONY | 0987, 0988, 0989 |
| SYMPHONIC | 0899 |
| TOSHIBA | 0973, 0398 |
| TRUTECH | 1053 |
| YAMAHA | 0979, 0980 |
Note: If your brand isn’t listed, try the automatic code search method or check Universal Remote Codes for more options.
Read Also: gpx dvd player universal remote codes
Troubleshooting Common Issues
If your remote isn’t working after programming, try these fixes:
- Check Batteries: Make sure batteries are fresh and inserted correctly.
- Clear Obstacles: Remove anything blocking the remote’s signal to the DVD recorder.
- Try Another Code: Some codes only control certain functions. Test other codes for your brand.
- Reset the Remote: Remove the batteries for 10 seconds, then reinsert them and try again.
- Test All Functions: If the remote turns the device on but doesn’t control playback, try another code for full control.
For more help, visit Jasco Universal Remote Codes.
Additional Resources
For more information or codes for other devices, explore these resources:
- Official Jasco Support: Jasco Support
- GE Universal Remote Codes for TVs: GE TV Codes
- GE Universal Remote Codes for DVD Players: GE DVD Codes
- Programming Without Codes: Code-Free Programming
Conclusion
Setting up your GE universal remote for your GE DVD Recorder + RW is quick and easy with the right codes and steps. This guide provides all the tools you need, from a complete code list to clear programming methods and troubleshooting tips. Now you can control your DVD recorder and other devices with just one remote. If you need more help, check the resources above or contact Jasco support. Enjoy your streamlined entertainment setup!
FAQs
How can I find the GE universal remote code for my device?
Your device’s GE universal remote code is often listed in the manual that came with your remote, in the handbook for your device, or online by searching for the model number and “GE universal remote code.” Additionally, certain GE universal remote controls have a code search feature that makes it simpler to find the right code
Can I control multiple devices with my GE universal remote?
Yes, your GE universal remote can operate multiple devices. Just repeat the setup procedures for each device you want to program.
How do I reset my GE universal remote?
Remove the batteries for 10 seconds, reinsert them, and try programming again.