Are you trying to program your GE universal remote for your Polaroid TV? This guide provides a complete list of codes and clear instructions to get your remote working. Whether you have an older or newer Polaroid TV, we’ve compiled codes from reliable sources to help you. Follow the steps below to set up your remote quickly.
List of GE Universal Remote Codes for Polaroid TVs
Below are the codes for programming your GE universal remote to a Polaroid TV. They are organized by the number of digits, as different GE remote models use 3, 4, or 5-digit codes. Try codes that match your remote’s format.
3 Digit Codes
| 214 | 173 |
| 029 | 182 |
| 133 | 116 |
4 Digit Codes
| 1177 | 1169 |
| 1162 | 1025 |
| 0214 | 0182 |
| 0173 | 0133 |
| 1019 | 1136 |
| 0116 | 0029 |
| 2401 | 5541 |
| 0191 | 6491 |
| 4631 | 0581 |
| 5411 | 1241 |
| 1961 | 2081 |
| 6101 | 2271 |
| 2311 | 2451 |
| 5131 | 3741 |
How to Program Your GE Universal Remote for Polaroid TV
Programming your GE universal remote is simple if you follow these steps. Make sure you have the correct code ready.
Step 1: Prepare Your Remote and TV
- Turn on your Polaroid TV.
- Ensure your GE remote has working batteries.
Step 2: Enter Programming Mode
- Find the “Setup” button on your GE remote.
- Press and hold “Setup” until the indicator light turns on (usually red).
- Release the button. The remote is now in programming mode.
Step 3: Select the Device
- Press the “TV” button on the remote.
- The indicator light should stay on, showing it’s ready for a code.
Step 4: Enter the Code
- Use the number buttons to enter a 3, 4, or 5-digit code from the list above.
- The indicator light should flash or stay on to confirm the code is entered.
Step 5: Test the Remote
- Point the remote at the TV and press the “Power” button.
- If the TV turns off, the code is correct, and the remote is programmed.
- If the TV doesn’t respond, repeat steps 2-4 with another code.
Auto-Code Search Method
If none of the codes work, try the auto-code search:
- Follow steps 1-2 above to enter programming mode and select “TV.”
- Press and hold the “Power” button until the TV turns off (may take a few seconds).
- Release the “Power” button when the TV turns off. The remote is now programmed.
Troubleshooting Common Issues
If you run into problems, here are solutions for common issues.
Remote Not Working
- Replace the batteries with fresh ones.
- Ensure the remote is pointed directly at the TV with no obstacles.
- Check if the remote is in “TV” mode by pressing the “TV” button.
Code Not Found
- Verify you’re using a code that matches your remote’s digit format (3, 4, or 5 digits).
- Try all codes in the relevant digit group.
- For very old or new Polaroid models, visit GE Universal Remote Codes for updated lists or contact GE support.
TV Responds to Power but Not Other Buttons
- The code may be partially correct. Try another code from the list.
- Ensure the remote is set to “TV” mode before using other functions like volume.
Additional Tips
Finding Your TV Model
- Check the back of your Polaroid TV or the user manual for the model number.
- The model number helps identify compatible codes, especially for older TVs.
Trying Mitsubishi Codes
- Some Polaroid TVs work with Mitsubishi codes, as reported by users . Try Mitsubishi codes if the listed ones don’t work.
Using a Universal Remote App
- For newer Polaroid TVs, consider a universal remote app from the Google Play Store or Apple App Store.
- These apps can control your TV via your smartphone if the remote fails.
Resetting Your Polaroid TV
- To reset your TV without a remote, press the “Menu” button on the TV panel.
- Use the “Arrow” or “Volume” buttons to navigate to “Setup” and select “Factory Reset.”
Conclusion
Programming your GE universal remote for a Polaroid TV is straightforward with the right codes and steps. This guide provides a comprehensive list of codes and clear instructions to help you succeed. If you encounter issues, the troubleshooting tips should resolve most problems. For the latest codes or support, check GE Universal Remote Support or contact the manufacturer. Happy programming!
FAQ’s
How do I manually program my GE Universal Remote?
Hold down the Setup button while pressing it until the red light appears. The light is typically located on the power button or at the top of the remote. When the red light appears, let go of your finger. In order to programme a device, press the appropriate button.
How do I enter GE remote code?
You want to connect your remote. When the indicator light turns “RED,” hold down the “Setup” button for a short period of time. Choose the button for the coordinating device, such as “TV,” “DVD,” or “AUX.” Put in the code ( It can be either 3-digits or 4-digits).