GE Universal Remote Codes For RCA TV: Complete Guide

Universal remotes simplify your entertainment setup by controlling multiple devices with one remote. If you have a GE universal remote and an RCA TV, you need specific codes to pair them. This guide provides a comprehensive list of GE universal remote codes for RCA TVs, step-by-step programming instructions, troubleshooting tips, and additional resources to ensure success. All information is up-to-date as of June 25, 2025, and sourced from reliable websites.

GE Universal Remote Codes for RCA TV

Below is a list of codes to program your GE universal remote for RCA TVs. These codes are compiled from multiple authoritative sources and should work with most RCA TV models. Codes may vary depending on your GE remote model and RCA TV.

3 Digit Codes

031004
048081
054094
100102
107129
191005
009000
162163
342003
015022
096113
125179
187188
007194
181167
133103
101099
098083
082078
011

4 Digit Codes

01311001
61712851
00016581
23610051
17314921
28913431
24811741
21212131
00910691
35710141
23810251
23711331
12216461
11316451
64410891
08110551
57810361
02611371
34214011
29512301
22512151
21112061
59616421
19216411
18516401
16912011
15211421
2141

How to Program Your GE Universal Remote for RCA TV

Programming your GE universal remote to work with your RCA TV is simple. Follow these steps carefully:

Step 1: Prepare Your Devices

  • Turn on your RCA TV.
  • Ensure your GE universal remote has fresh batteries.

Step 2: Enter Programming Mode

  • Find the “Setup” button on your GE remote. Some models may use a different button; check your manual if unsure.
  • Press and hold the “Setup” button until the red light on the remote stays lit. This means the remote is in programming mode.

Step 3: Enter the Code

  • Use the number buttons on your remote to enter one of the codes listed above for RCA TVs.
  • After entering the code, the red light should turn off, indicating the code was accepted.

Step 4: Test the Remote

  • Point the remote at your RCA TV and press the “Power” button.
  • If the TV turns off, the code is correct, and the remote is programmed.
  • If the TV doesn’t respond, repeat the process with another code from the list.

Alternative Method: Auto Code Search

If the listed codes don’t work or you’re unsure of the correct code, use the auto code search feature:

  • Turn on your RCA TV.
  • Press and hold the “TV” button on your remote until the red light stays lit.
  • While holding the “TV” button, press and release the “Setup” button. The red light will blink.
  • Continue holding the “TV” button and press the “Power” button repeatedly until your TV turns off. This may take several tries as the remote cycles through all possible codes.
  • Once the TV turns off, release the “TV” button. The remote should now be programmed.

Troubleshooting

If you’re having trouble programming your remote, try these tips:

  • Check Batteries: Ensure your remote has fresh batteries.
  • Clear Line of Sight: Make sure there are no obstacles between the remote and the TV.
  • Try Different Codes: Some codes may work better for your specific TV model.
  • Check Remote Model: If your remote lacks a Setup button, consult the manual for model-specific instructions.
  • Reset and Retry: If the remote doesn’t respond, remove the batteries, wait a minute, and try again.

For further assistance, visit the official Jasco website or contact their support at (800) 654-8483.

Conclusion

Programming your GE universal remote for an RCA TV is simple with the right codes and steps. This guide provides a comprehensive list of codes, clear instructions, and troubleshooting tips to help you succeed. If a code doesn’t work, try another or use the auto code search feature. For additional support, leave us a comment on urclist.site refer to the Jasco website or RCA’s code finder. With this guide, you can quickly set up your remote and enjoy a streamlined entertainment experience.

FAQs

What if my GE remote doesn’t have a Setup button?

Some GE remotes use alternative buttons or methods for programming. Refer to your remote’s manual or the Jasco website for model-specific instructions.

Are there codes for RCA Roku TVs?

Yes, for GE remotes CL5 and CL6, the code 6171 is listed for RCA Roku TVs.

What if none of the codes work?

Try the auto code search feature or visit the Jasco website for additional codes or support.

Leave a Comment