GE Universal Remote Codes For Roku TV

A universal remote simplifies your home entertainment by controlling multiple devices with one tool. GE universal remotes are widely used because they work with many devices, including Roku TVs. To use a GE remote with your Roku TV, you need the correct 4-digit code for your TV brand and remote model. This guide provides a comprehensive list of GE universal remote codes for Roku TVs, step-by-step programming instructions, troubleshooting tips, and alternative solutions. Whether you have a TCL, Hisense, or another Roku TV brand, this article will help you set up your remote quickly.

Finding Your GE Universal Remote Model

Before programming, identify your GE universal remote’s model number. GE remotes are labeled as CL3, CL4, CL5, or CL6. To find this:

1. Remove the batteries from your remote.
2. Look for a label inside the battery compartment.
3. Note the model number (e.g., CL5 or CL6).

The model number is important because codes vary by model. For example, CL3 remotes may not support Roku TVs, while CL4, CL5, and CL6 models do.

GE Universal Remote Codes for Roku TV

Below is a complete list of 4-digit codes for programming your GE universal remote to work with Roku TVs. The codes are organized by remote model and TV brand for easy reference.

GE Universal Remote CL3 Codes For Roku

Here is the complete list of GE Universal Remote CL3 Codes For Roku:

1. Code for new models: 2891, 1741
2. Codes for GE remotes models after 2013: 4395, 4355
3. Codes for 2011-2012 models: 7317
4. Codes (mixed V3/V5/CL3) for new models: 6171, 6251, 6001, 6381, 2891, 1741, 5931

GE Universal Remote CL4 Codes For Roku

Here is the complete list of GE Universal Remote CL4 Codes For Roku:

• 4-Digit Codes: 617, 6001, 2891, 1741, 5931
• 4-Digit Codes For New Brands: 6171, 6251, 6001, 6381. 2891, 1741, 5931
• Codes for the Roku Stick (CL4): 0903, 2014, 4395
• For Sharp Roku: 6251, 6001

GE Universal Remote CL5 Codes For Roku TV

Here is the complete list of GE Universal Remote CL5 Codes For Roku:

6171	6251
6001	6381
2891	1741

How to Program Your GE Universal Remote

You can program your GE universal remote in two ways: with a code or without a code. Follow these steps carefully to ensure success.

Method 1: Programming with a Code

1. Turn on your Roku TV using the TV’s power button.
2. Press and hold the Setup button on your GE remote until the red light on the power button turns on.
3. Press the TV button on the remote.
4. Enter a 4-digit code from the list above (e.g., 6171 for TCL Roku TV).
5. The red light will turn off, indicating the code is accepted.
6. Test the remote by pressing the Power button. If the TV turns off, the programming worked. If not, repeat steps 2–5 with another code from the list.

Method 2: Programming Without a Code

If you don’t have a working code or prefer an alternative method:

1. Turn on your Roku TV.
2. Press and hold the Setup button until the red light turns on.
3. Press the TV button.
4. Slowly press and release the Power button every 5 seconds until the TV turns off.
5. Turn the TV back on manually using the TV’s power button.
6. Slowly press and release the Channel Up button every 3 seconds until the TV turns off again.
7. Press the TV button to save the code.
8. Test all functions (power, volume, input) to ensure they work.

Troubleshooting Common Issues

If your GE universal remote doesn’t work after programming, try these solutions:

• Check Batteries: Ensure the batteries are fresh and properly inserted.
• Verify Code: Confirm you’re using the correct code for your TV brand and remote model. Try all listed codes if needed.
• Repeat Programming: Start the programming process from step 1, as errors can occur if steps are missed.
• Test Functions: Some codes only control basic functions (e.g., power, volume). Test other codes for full functionality.
• Reset Remote: Remove the batteries, press all buttons to discharge the remote, then reinsert batteries and try again.
• Check Compatibility: Ensure your remote model (e.g., CL4, CL5, CL6) supports Roku TVs. CL3 models may not work.

If issues persist, visit the Roku Support page for additional guidance or contact GE support at (800) 654-8483.

Conclusion

Programming your GE universal remote to work with your Roku TV is straightforward with the right codes and steps. Use the codes provided for your TV brand and remote model, and follow the programming instructions carefully. If you encounter issues, troubleshooting steps or a remote app can help. By setting up your remote correctly, you can enjoy a simpler way to control your Roku TV and other devices.

FAQ’s