Programming a GE universal remote to work with your TCL TV is simple. This guide provides the latest GE universal remote codes for TCL TVs, step-by-step instructions, and troubleshooting tips. Whether you have a TCL Smart TV or a TCL Roku TV, we’ll help you set up your remote quickly. Our content is up-to-date as of June 2025, ensuring accurate codes and methods.
Why Use a GE Universal Remote with Your TCL TV?
A GE universal remote can control multiple devices, including your TCL TV. It simplifies your setup by replacing multiple remotes. This guide focuses on TCL TVs, including Roku and Google TV models, to address your needs.
How to Program a GE Universal Remote for TCL TV
You can program your GE universal remote using two methods: direct code entry or auto code search. Below, we explain both methods clearly.
Method 1: Direct Code Entry
This method uses specific codes to pair your remote with your TCL TV. Follow these steps:
- Turn on your TCL TV.
- Press and hold the Setup button on your GE remote until the red light stays on.
- Press the TV button. The red light may blink once.
- Enter one of the codes listed below for TCL TVs.
- If the code is correct, the red light turns off.
- Test the remote by pressing Power or Volume. If it works, you’re done. If not, try the next code.
GE Universal Remote Codes For TCL TV
GE Universal Remote CL3 Codes For TCL TV
- 4921
- 3571
- 3431
- 3421
- 2301
- 2111
- 2011
- 2061
- 1851
- 6201
- 6171
- 5771
- 6031
GE Universal Remote CL4 Codes For TCL TV
- 2891
- 6171
- 5961
- 6031
- 5771
- 1741
- 6201
- 4921
GE Universal Remote CL5 Codes For TCL TV
- 2891
- 6171
- 5961
- 6031
- 1741
- 5771
- 6201
Note: Codes vary by remote model (CL3, CL4, CL5, or CL6). Check the battery compartment for your remote’s version.
Method 2: Auto Code Search
If you don’t have the correct code, use the auto code search method. This method scans for the right code automatically.
- Turn on your TCL TV.
- Press and hold the Setup button until the red light stays on.
- Press the TV button. The light may blink once.
- Press and hold the Power button every 2 seconds until the TV turns off.
- When the TV turns off, press Enter or OK to lock the code.
- Test the remote by turning the TV back on.
Tip: Point the remote at the TV during the entire process.
GE Universal Remote Codes for TCL Roku TV
TCL Roku TVs may require different codes. Try these first:
- 2891
- 6171 (recommended by Jasco, the GE remote manufacturer)
- 12434 (noted as nearly universal for TCL TVs)
Follow the same direct code entry or auto code search steps above.
Troubleshooting Common Issues
Sometimes, programming doesn’t work right away. Here are solutions to common problems:
- Remote Doesn’t Respond: Ensure fresh batteries are installed. Avoid leaving the remote without batteries for more than 10 minutes, as it may reset.
- Code Doesn’t Work: Try all listed codes. Some TCL TVs have multiple codes. If none work, use auto code search.
- Partial Functionality: Some codes only control basic functions (power, volume). Try another code for full control.
- Resetting the Remote: Press Setup until the red light turns on, then press Mute and 0. The light flashes twice when reset.
Tips for Successful Programming
- Check your remote’s version (CL3, CL4, CL5, or CL6) in the battery compartment. This narrows down the code list.
- Use fresh batteries to avoid interruptions.
- Point the remote directly at the TV during programming.
- If you have a TCL Google TV, start with code 12434.
- For more codes, visit Jasco’s official code list.
Conclusion
Setting up your GE universal remote with your TCL TV is straightforward with the right codes and steps. Use the provided 3-digit and 4-digit codes, follow the direct code entry or auto code search methods, and troubleshoot any issues with our tips. This guide ensures your remote works with TCL Smart TVs, Roku TVs, or Google TVs. For more help, check the linked resources or try additional codes from Jasco’s official site. Get your remote programmed today and enjoy a simplified TV experience.
FAQ’s
Where can I find TCL code?
These codes are provided by the cable companies for TV remotes. TCL is dependent on these businesses to supply their codes. Please get in touch with your provider if the brand or model of your remote is not listed.
How do I auto program my GE universal remote?
Hold the remote’s Setup button down while doing so. until the remote’s LED button lights up. Activate the Right Component button. If necessary, press the component button on your device. Press and hold the Power button for as long as it takes for your smartphone to turn off.
Why is my TCL TV not responding to the remote?
Make sure the remote is aimed at the TV directly or at a suitable distance. Attempt to reseat the batteries. It’s conceivable that the batteries were put incorrectly if the remote is still unresponsive or responds only sometimes. Consider taking out and replacing the remote’s batteries.