GPX DVD Player Universal Remote Codes & Programming Guide

Lost your GPX DVD player’s original remote? Want to use a universal remote to control your DVD player and other devices? This guide has everything you need. We provide universal remote codes for GPX DVD players and clear instructions to program your remote. You’ll also find troubleshooting tips and answers to common questions. Written in simple English, this article is easy to follow for everyone, from beginners to tech-savvy users. Let’s get your remote working!

Finding Your GPX DVD Player Model Number

Knowing your GPX DVD player’s model number is key to finding the right remote codes. The model number ensures you use codes compatible with your specific device. Here’s how to locate it:

• Check the Device: Look on the back or bottom of your DVD player for a label with the model number (e.g., D200B).
• Review the Manual: Find the model number in the user manual that came with your DVD player.
• Search Online: If you don’t have the manual, search for “GPX DVD player manual” with any identifying details, like the serial number, on the GPX Official Website.

Having the model number helps you avoid trial and error with codes.

How to Program Your Universal Remote

You can program your universal remote to work with your GPX DVD player in three ways: using a code, auto search (without a code), or code search. Follow the steps below for each method.

Method 1: Programming with a Code

This method uses a specific code from the list above.

1. Turn on your GPX DVD player.
2. Press and hold the “Setup” button on your universal remote until the LED light turns on.
3. Enter a code for your GPX DVD player using the remote’s number buttons.
4. The LED light should turn off, showing the code was accepted.
5. Test the remote by pressing the “Power” button to turn off the DVD player.

Method 2: Auto Search (Without a Code)

This method scans for the correct code automatically.

1. Turn on your GPX DVD player.
2. Press and hold the device button (e.g., “DVD”) on your remote until the LED light turns on.
3. While holding the device button, press and release the “Power” button.
4. Release the device button, then press and hold the “Power” button again.
5. Keep holding “Power” and press “Channel Up” or “Volume Up” repeatedly until the DVD player turns off.
6. Release the buttons when the DVD player turns off. The remote is now programmed.

Method 3: Code Search

This method searches for a code by cycling through options.

1. Turn on your GPX DVD player.
2. Press and hold the “Setup” button on your remote until the LED light turns on.
3. Press the device button (e.g., “DVD”) once.
4. Press and hold the “Power” button and press “Channel Up” repeatedly until the DVD player turns off.
5. Release both buttons when the DVD player turns off. The remote is now programmed.

Universal Remote Codes for GPX DVD Players

Below are universal remote codes for GPX DVD players. These codes are grouped by digit length, as different remotes require 3-digit, 4-digit, or 5-digit codes. Note that the correct code depends on your universal remote’s brand and model (e.g., GE, RCA, Philips).

GPX DVD Player Universal Remote 3 Digit Codes

• 826
• 704
• 098

GPX DVD Player Universal Remote 4 Digit Codes

• 0944
• 2114
• 0936
• 2390

GPX DVD Player Universal Remote 5 Digit Codes

• 22164
• 51304
• 20769
• 54908
• 22235
• 20699

Troubleshooting

If your remote isn’t working, try these solutions:

• Check Batteries: Ensure your remote has fresh batteries.
• Clear Obstructions: Make sure nothing blocks the signal between the remote and DVD player.
• Try Different Codes: Test other codes from the list, as some may work better.
• Consult the Manual: Check your universal remote’s manual for specific instructions or visit the manufacturer’s website, like GPX Support.

If problems persist, contact the remote’s manufacturer for help.

Additional Tips

• Control Multiple Devices: Program your universal remote to manage your TV, DVD player, and other devices for a streamlined setup.
• Keep It Clean: Wipe your remote regularly to prevent dust buildup, which can affect performance.
• Label Buttons: If controlling multiple devices, use a remote with dedicated buttons or label them to avoid confusion.

Conclusion

Programming a universal remote for your GPX DVD player is simple with the right codes and instructions. This guide provides everything you need to get started, from finding your model number to troubleshooting issues. By following these steps, you can enjoy a clutter-free entertainment setup with one remote controlling your devices. For more help, visit GPX Support or explore our related guides.

FAQs