How To Program Mitsubishi TV Remote: Step-by-Step Process

Programming your Mitsubishi TV remote can simplify your entertainment setup by allowing you to control your TV and other devices, like a cable box or soundbar, with one remote. This guide provides clear, step-by-step instructions for programming a Mitsubishi-branded or universal remote, using either pre-set codes or the code search method. We’ve included common codes, troubleshooting tips, and answers to frequently asked questions, all verified for accuracy as of July 2025. Follow these steps to get your remote working quickly and efficiently.

What You’ll Need

Before starting, ensure you have:

• A Mitsubishi TV remote or a universal remote compatible with Mitsubishi TVs
• Your Mitsubishi TV
• Any additional devices you want to control (e.g., cable box, DVD player, soundbar)

Step-by-Step Guide to Programming Your Mitsubishi TV Remote

You can program your remote using two methods: entering pre-set codes or using the code search feature. Both are simple, and we’ll walk you through each.

Method 1: Using Pre-Set Codes

This method uses specific codes for your device. Follow these steps:

1. Select the Device
   • Move the slide switch on top of the remote to the position for the device you’re programming (e.g., TV for your Mitsubishi TV, CABLE/SAT for a cable box, DVD for a DVD player, or AUDIO for a soundbar).
2. Enter Programming Mode
   • Press and hold the POWER button until it blinks twice and turns off.
3. Enter the Code
   • Use the number buttons to enter a 3-digit or 5-digit code for your device (see common codes below).
   • The POWER button will blink twice when you start entering the code, once for each keypress, and twice again if the code is valid.
4. Test the Remote
   • Point the remote at the device and press POWER, VOL, or MUTE to check if it responds.
   • If it doesn’t work, repeat steps 1–4 with the next code.

Method 2: Using Code Search

If you don’t have the correct code or the pre-set codes fail, use the code search method to find a compatible code automatically.

1. Select the Device
   • Set the slide switch to the position for the device (e.g., CABLE/SAT, DVD, or AUDIO).
2. Enter Code Search Mode
   • Press and hold POWER until it blinks twice and turns off.
   • Press 9, 9, 1, then press 1 for CABLE/SAT, 2 for DVD, or 3 for AUDIO.
3. Search for the Code
   • Press CH↑ (channel up) and POWER repeatedly until the device responds (e.g., the TV turns on or off).
   • If the device lacks a power function, try PLAY, STOP, VOL, or MUTE.
   • Once the device responds, press ENTER to save the code.

Common Codes for Mitsubishi TVs and Devices

Here are common codes for programming your Mitsubishi TV remote. Codes vary by model, so test multiple if needed.

Device Type	Brand	Codes
Mitsubishi TV	Net Command TM	935
	All other Models	000
Audio Receivers	Mitsubishi	010, 011, 012, 013, 014
	Denon	234, 235, 236, 245, 246, 359
	JVC	232, 233
	Kenwood	200, 208
	Onkyo	209, 214, 247
	Panasonic	218, 219, 221
	Pioneer	205, 207
	Sony	222
	Technics	218, 219, 221
	Yamaha	201, 202, 243, 244
Cable Boxes	General Ins./Jerrold/Motorola	111, 119, 120, 121, 122, 123, 124, 125, 126, 127
	Oak	102, 137, 139
	Pioneer	101, 116
	Scientific Atlanta	111, 112, 113
	Zenith	100, 117

Note: If these codes don’t work, try the code search method or check for a complete list 3, 4, 5 Digit Mitsubishi TV Universal Remote Codes and Programming Guide.

Troubleshooting

If your remote doesn’t work after trying both methods, try these solutions:

• Check Batteries: Replace weak or incorrectly inserted batteries.
• Verify Slide Switch: Ensure the switch is set to the correct device position (e.g., TV for your Mitsubishi TV).
• Confirm Compatibility: Verify your device is compatible with the remote. Check the device’s manual.
• Consult the Manual: Your Mitsubishi TV’s manual may list model-specific codes or instructions.
• Reset the Remote: Some remotes require a reset before reprogramming. Refer to your manual for reset steps.

For additional support, visit Mitsubishi Electric’s official support page.

Additional Tips

• Save Working Codes: Write down any successful code for future use, especially after changing batteries.
• Verify the Code: To check the programmed code:
  1. Set the slide switch to the device position.
  2. Press and hold POWER until it blinks twice and turns off.
  3. Press 9, 9, 0.
  4. Press 1 and count the POWER button blinks for each digit of the code.
• Universal Remote Users: Ensure your universal remote supports Mitsubishi TVs. Check its manual for additional codes or steps.

Conclusion

Programming your Mitsubishi TV remote is a quick way to control your TV and other devices with ease. Whether you use pre-set codes or the code search method, this guide provides all the steps you need for success. If you encounter issues, our troubleshooting tips and resources can help. Share your experience or ask questions in the comments on Urclist.site.

Related Resources

• Internal Links:
  • The Complete Guide to Programming a Samsung Blu-ray Remote
  • How To Program A Universal Remote To A Dynex TV
  • Programming Philips Universal Remote Codes: A Comprehensive Guide

Frequently Asked Questions