How To Program RCA Universal Remote To Westinghouse TV[2025 Guide]

Programming your RCA universal remote to work with your Westinghouse TV is a straightforward task that can save you from managing multiple remotes. Whether you’ve lost your original TV remote or want a single device to control your entertainment setup, this guide provides clear, step-by-step instructions. We’ve researched the latest methods and verified codes as of June 2025 to ensure accuracy. Follow these steps to program your remote in about 5 minutes, and find troubleshooting tips for any issues.

Introduction

An RCA universal remote can control multiple devices, such as your Westinghouse TV, cable box, or streaming player, with one device. This is ideal if you’ve misplaced your original remote or want to simplify your home entertainment system. This guide focuses on programming your RCA universal remote specifically for a Westinghouse TV using two methods: entering a code manually or using an auto-search feature. We’ve also included tips to address common problems and answers to frequently asked questions.

Finding the Right Code

To program your RCA universal remote, you need the correct code for your Westinghouse TV. These codes depend on your TV and remote model. Based on the latest information available in 2025, here are the codes for Westinghouse TVs:

Code Type	Codes
4-Digit	1712, 3559, 3382, 2293, 3094, 3470, 2397, 0463
5-Digit	11712, 10451, 10885, 10889, 11282, 11300, 11577

You can find the complete list of RCA universal remote here.

Method 1: Programming with a Code

Using a code is the fastest way to program your RCA universal remote. Follow these steps:

1. Turn on your Westinghouse TV using its power button or another remote.
2. Locate the “TV” button on your RCA universal remote.
3. Press and hold the “TV” button until the power button on the remote lights up and stays on.
4. While holding the “TV” button, enter one of the codes (e.g., 1712 for a 4-digit code or 11712 for a 5-digit code).
5. Release the buttons. If the power button remains lit, the code is likely correct. Test the remote by pressing the power button to turn off the TV.
6. If the power button blinks 4 times, the code is incorrect. Try the next code from the list and repeat the process.

Note: Ensure your remote supports 5-digit codes if you’re using one. Most RCA remotes made after 2016 do.

Method 2: Programming Without a Code (Auto-Search)

If you don’t have a code or none of the codes work, use the auto-search method. This method cycles through all possible codes until it finds one that matches your TV. Here’s how:

1. Turn on your Westinghouse TV.
2. Aim the RCA remote at the TV.
3. Press and hold the “TV” button until the light on the remote turns on.
4. Press and hold the “On/Off” and “TV” buttons together until the light turns on again.
5. Press and hold the “Play” or “Slow” button for 5 seconds. Release it, then press it again every 5 seconds.
6. Continue until the TV turns off. When it does, the remote is synced.

Note: This method may take several minutes, as it tests many codes. Be patient and keep the remote aimed at the TV.

Troubleshooting

If your remote doesn’t work after trying both methods, try these solutions:

• Check the batteries: Use fresh batteries and ensure they’re inserted correctly.
• Reset the remote: Remove the batteries, wait 10 seconds, and reinsert them. Then, restart the programming process.
• Try all codes: If one code fails, test each code from the list in Method 1.
• Verify compatibility: Some RCA remotes may not work with certain Westinghouse TV models. Check your remote’s manual or contact RCA support via the RCA Accessories website.
• Distance and angle: Ensure you’re pointing the remote directly at the TV from about 3–5 feet away.

Additional Tips

• Your RCA universal remote can control up to 8 devices, such as cable boxes, DVD players, or streaming devices. Program each device separately using the appropriate codes.
• Check your remote’s manual for model-specific instructions, as some steps may vary slightly.
• For more codes or support, visit the RCA Accessories website or refer to resources like Digital Trends or AllConnect.

Conclusion

Programming your RCA universal remote to your Westinghouse TV is a quick and simple process that can streamline your home entertainment setup. By following the steps outlined—using either the code-entry or auto-search method—you can have your remote working in minutes. Keep this guide handy for troubleshooting or programming other devices, and check the RCA Accessories website for additional support. With the right code and a bit of patience, you’ll have full control of your Westinghouse TV in no time.

FAQs