How To Program Samsung Blu Ray Remote To TV?

If you own a Samsung Blu-ray player and a Samsung TV, you can simplify your home entertainment setup by using your Blu-ray remote to control certain TV functions. This feature eliminates the need for multiple remotes, making it easier to manage your viewing experience. This guide explains how to use your Samsung Blu-ray remote to control your TV, including setup steps, troubleshooting tips, and answers to common questions.

Compatible Devices

To use this feature, your devices must meet these requirements:

• Samsung Products: Both the Blu-ray player and TV must be manufactured by Samsung.
• HDMI Connection: The devices must be connected using an HDMI cable, which enables communication between them.

This setup allows the Blu-ray remote to send commands to the TV, controlling specific functions seamlessly.

Functions You Can Control

The Samsung Blu-ray remote typically includes dedicated buttons to control the following TV functions:

• Power On/Off: Turn your TV on or off using the Blu-ray remote.
• Volume Adjustment: Increase or decrease the TV’s volume directly from the remote.
• Input Source Selection: Switch the TV’s input to the Blu-ray player, allowing you to view Blu-ray content (may require additional setup).

These functions are designed to work specifically with Samsung TVs and may not be compatible with other brands.

How It Works

The Blu-ray remote has buttons labeled for TV control, such as:

• TV Power: Turns the TV on or off.
• TV Volume: Adjusts the TV’s volume up or down.
• TV Input: Changes the TV’s input source to the Blu-ray player.

When you press these buttons, the remote sends infrared signals to the TV, allowing you to control these functions without using the TV’s remote. This feature is built into most Samsung Blu-ray player remotes, making it user-friendly and convenient.

Setup Requirements

For basic functions like power and volume control, no additional setup is typically required. Ensure the following:

1. Connect your Blu-ray player to your TV using an HDMI cable.
2. Power on both devices.

For advanced functionality, such as setting the input source, you may need to enable Anynet+ (HDMI-CEC) on both devices. Anynet+ is Samsung’s implementation of HDMI-CEC, which allows devices to communicate and control each other over an HDMI connection. Check your TV and Blu-ray player manuals to confirm Anynet+ support.

Step-by-Step Guide

Follow these steps to use your Samsung Blu-ray remote to control your TV:

1. Connect Devices: Plug an HDMI cable into the HDMI ports of your Samsung Blu-ray player and Samsung TV.
2. Power On: Turn on both the Blu-ray player and the TV.
3. Locate TV Control Buttons: Find the buttons on your Blu-ray remote labeled for TV control (e.g., TV Power, TV Volume, TV Input). These are usually marked with “TV” or similar icons.
4. Test the Functions:
   • Press the TV Power button to turn the TV on or off.
   • Use the TV Volume buttons to adjust the TV’s volume.
   • Press the TV Input button to switch the TV’s input source to the Blu-ray player, if applicable.

If the input source function doesn’t work, you may need to enable Anynet+ (see below).

Enabling Anynet+ (HDMI-CEC)

While not always necessary for basic functions, enabling Anynet+ can enhance compatibility, especially for input source control. Here’s how to enable it:

• On Your TV:
  1. Press the Home button on your TV remote.
  2. Navigate to Settings > General > External Device Manager.
  3. Select Anynet+ (HDMI-CEC) and set it to On.
• On Your Blu-ray Player:
  1. Refer to your Blu-ray player’s user manual for specific instructions, as the process varies by model.
  2. Look for an Anynet+ or HDMI-CEC setting in the player’s menu and enable it.

Note: Ensure your HDMI cable supports HDMI-CEC, as some older cables may not. If Anynet+ is not supported, basic functions like power and volume should still work.

For detailed Anynet+ setup, visit Samsung’s Anynet+ guide.

Troubleshooting

If the TV control functions don’t work, try these steps:

• Check HDMI Connection: Ensure the HDMI cable is securely connected to both devices.
• Clear Line of Sight: Remove any obstacles between the remote and the TV to ensure the infrared signal reaches the TV.
• Replace Batteries: Install fresh batteries in the Blu-ray remote if the current ones are low.
• Verify Compatibility: Confirm that your Blu-ray player and TV models support the TV control feature by checking their user manuals.
• Reset Anynet+: If using Anynet+, disable and re-enable it on both devices to refresh the connection.

If issues persist, contact Samsung Support at 1-800-SAMSUNG for assistance.

Why This Is Useful

Using your Samsung Blu-ray remote to control your TV streamlines your home entertainment experience. Instead of switching between multiple remotes, you can handle essential TV functions—power, volume, and input source—directly from your Blu-ray remote. This is particularly convenient when watching Blu-ray discs, as you can set up your system with minimal effort.

Additional Tips

• Check Your Remote Layout: The placement of TV control buttons may vary by Blu-ray player model. Refer to your user manual to locate them. For example, the Samsung BD-J5100 remote has clearly labeled TV buttons.
• Update Firmware: Ensure your Blu-ray player and TV have the latest firmware to maintain compatibility and improve performance. Check for updates via Samsung’s support page.
• Use a Universal Remote as Backup: If you encounter issues or need to control non-Samsung devices, consider a universal remote. Learn more at Samsung’s universal remote guide.

Conclusion

Using your Samsung Blu-ray remote to control your TV is a simple and effective way to enhance your home entertainment setup. By connecting your Samsung Blu-ray player and TV via HDMI, you can control essential TV functions like power, volume, and input source with ease. This guide provides clear steps, troubleshooting tips, and answers to common questions to ensure a seamless experience. For more information, refer to your device’s user manual or Samsung’s support resources.

FAQ’s