A Vivitar universal remote lets you control multiple devices like TVs, DVD players, and cable boxes with one device. It’s perfect for replacing lost remotes or simplifying your setup. This guide explains how to program your Vivitar remote using codes or auto search, includes codes for popular brands, and offers troubleshooting tips. All information is current as of July 2025, ensuring you have the latest steps for most Vivitar models.
What Is a Vivitar Universal Remote?
A Vivitar universal remote controls up to 8 devices, such as:
- TVs
- DVD and Blu-ray players
- Cable and satellite boxes
- Soundbars and audio systems
It uses infrared (IR) signals, so you must point it directly at the device. Its simple design and large buttons make it easy to use, especially for budget-conscious users replacing original remotes.
How to Program Your Vivitar Universal Remote
You can program your Vivitar remote in two main ways: using codes or auto search. Below are clear steps for each method.
Programming with Codes
This method uses a 4-digit code specific to your device brand and model. It’s the fastest option if you have the correct code.
Steps:
- Turn on the device (e.g., TV).
- Press and hold the device button (e.g., TV, DVD) on the remote until the LED light stays on.
- Enter the 4-digit code for your device (see code list here).
- If the code works, the LED flashes four times. If not, the LED turns off—try another code.
- Point the remote at the device and press the Power button. If the device turns off, programming is complete.
- Test other functions like volume or channel to confirm full control.
Tips:
- Try all listed codes for your brand if the first doesn’t work.
- Ensure no objects block the remote’s IR signal.
Programming Without Codes (Auto Search)
If you don’t have a code or can’t find one, use the auto search method to let the remote scan for the correct code.
Steps:
- Turn on the device you want to control.
- Press and hold the device button (e.g., TV) until the LED light stays on.
- Press and release the Power button while holding the device button.
- Keep pressing the Channel Up button slowly until the device turns off.
- Release the device button to save the code.
- Test the remote with functions like volume or channel.
Note: Auto search may take a few minutes as it cycles through codes. Press Channel Up slowly to avoid missing the correct code.
Vivitar Universal Remote Codes
Here are 4-digit codes for popular TV brands. Codes vary by model, so test multiple codes if needed. For other devices like DVD players or soundbars, check your manual or online resources.
| Brand | Codes |
|---|---|
| Samsung | 0702, 0019, 0056, 0408, 0766, 1060, 1395 |
| Vizio | 004, 011, 113, 502, 505, 627, 1064, 1226 |
| LG | 0178, 0700, 0856, 1325, 1758, 1265 |
| Sony | 1036, 1093, 1001, 1135, 1177 |
| Philips | 1483, 0690, 1454, 1154, 0054 |
| Sanyo | 1142, 0799, 0232, 0146, 0088 |
| Panasonic | 1125, 0125, 0124, 1163 |
| Insignia | 0171, 1204, 1517, 2002, 1963 |
For more codes, visit Universal Remote Codes or contact Vivitar support.
Troubleshooting Common Issues
If your remote doesn’t work after programming, try these fixes:
- Replace Batteries: Use fresh AAA batteries and ensure correct placement.
- Check Line of Sight: Point the remote directly at the device with no obstructions.
- Try Another Code: If the code fails, test other codes for your brand.
- Use Auto Search: If codes don’t work, try the auto search method.
- Reset the Remote: Check your manual for reset instructions (usually holding Setup and entering a code).
- Verify Compatibility: Some devices, like certain Blu-ray players, may not have listed codes. Contact Vivitar for help.
Additional Tips for Success
- Resetting the Remote: Clear previous programming by following your manual’s reset instructions, often involving the Setup button and a specific code.
- Programming Multiple Devices: Repeat the process for each device (up to 8). Use the correct device button (e.g., DVD, CBL) for each.
- Battery Care: Use high-quality AAA batteries to avoid weak signals or unresponsive buttons.
Conclusion
Programming your Vivitar universal remote is quick and easy with the right steps. Use codes for a fast setup or auto search if codes are unavailable. This guide provides everything you need, from codes to troubleshooting, to control your devices seamlessly. For more remote programming tips, explore Urclist.site.