JBL Soundbar Remote Control Codes: A Comprehensive Guide

JBL soundbars are known for their high-quality audio, making movies, music, and games more immersive. However, if you’ve lost the original remote or want to use a universal or TV remote, you’ll need the right codes and programming steps. This guide provides up-to-date JBL soundbar remote control codes, programming instructions, and troubleshooting tips to ensure a smooth experience. Whether you’re setting up a universal remote or syncing your TV remote, we’ve got you covered with clear, simple instructions.

Universal Remote Codes for JBL Soundbars

To control your JBL soundbar with a universal remote, you need specific codes. Below are the most commonly used codes, verified as of June 2025:

JBL Soundbar 4 Digit Remote Control Codes

• 6050
• 5009
• 4001

JBL Soundbar 5 Digit Remote Control Codes

• 31306
• 30281
• 30110
• 32241

Read Also: ge 6 device universal remote codes

How to Program Your Universal Remote to JBL Soundbar

Programming a universal remote to your JBL soundbar is simple. Follow these steps:

1. Turn on your JBL soundbar using the power button on the device.
2. Find the “Setup” or “Code Search” button on your universal remote.
3. Press and hold the “Setup” button until the indicator light turns on or blinks.
4. Enter one of the codes from the table above using the number buttons.
5. Press the “Power” button on the remote.
6. Check if the soundbar turns off. If it does, the code is correct. If not, repeat with another code.

For specific remotes like Comcast or DIRECTV, try these methods:

• Comcast Remote:
  • Turn on your soundbar.
  • Press the “Aux” button once.
  • Press and hold “Setup” until it blinks twice.
  • Enter 9913 or 993.
  • Press “Power” and aim at the soundbar.
  • Press “CH+” until the soundbar turns off.
  • Press “Setup” to lock the code.
• DIRECTV Remote:
  • Turn on your soundbar and set the volume up but muted.
  • Press “AV1” or “AV2.”
  • Hold “MUTE” and “SELECT” until it blinks twice.
  • Enter 991, then 3.
  • Press “VOL UP,” point at the soundbar, and press “CH UP” until the volume changes.
  • Press “SELECT” to lock the code.

Using Your TV Remote with JBL Soundbar

You can program your JBL soundbar to respond to your TV remote using its learning mode. This is ideal if you want to reduce the number of remotes you use. Here’s how:

1. Enter learning mode: Press and hold the “Surround” button on the soundbar until the LED blinks orange.
2. Program Volume +: Press “Volume +” on the soundbar, then press “Volume +” on your TV remote.
3. Program Volume -: Press “Volume -” on the soundbar, then press “Volume -” on your TV remote.
4. Program Mute: Press “Volume +” and “Volume -” together on the soundbar, then press “Mute” on your TV remote.
5. Program Power: Press “Power” on the soundbar, then press “Power” on your TV remote.
6. Exit learning mode: Press and hold the “Surround” button again until the LED stops blinking.

Note: After each step, the orange LED will turn white for one second, indicating the code was learned. Wait for the orange LED to blink again before proceeding to the next step.

Troubleshooting: When Codes Don’t Work

If the codes or programming steps don’t work, try these solutions:

• Use Code Search: If the listed codes fail, use the code search method for your remote (see Comcast or DIRECTV instructions above).
• Verify Model Compatibility: Codes vary by model. For example, older models like the JBL SB400 may use different codes (e.g., 1306 or 11306). Check your soundbar’s manual or go to urclist.site or contact JBL support.
• Reset the Soundbar: Resetting may resolve remote issues. Refer to your soundbar’s manual for reset instructions, as steps vary by model.
• Check Batteries: Ensure your remote has fresh batteries, as weak batteries can cause issues.
• HDMI-CEC Issues: If using HDMI-CEC, ensure it’s enabled on both your TV and soundbar. If you’re using an optical cable, HDMI-CEC won’t work, so rely on the learning mode or universal remote.

Conclusion

Controlling your JBL soundbar with a universal or TV remote is easy with the right codes and steps. This guide provides everything you need to program your remote, troubleshoot issues, and enjoy your soundbar’s full potential. For further assistance, visit JBL’s support page or call (800) 336-4525.

FAQs