3, 4, 5 Digit Jensen TV Universal Remote Codes: Complete Guide

A universal remote simplifies your Jensen TV experience by controlling power, volume, and channels with one device. This guide provides a complete list of 3-digit, 4-digit, and 5-digit Jensen TV universal remote codes, along with clear programming instructions and troubleshooting tips. Whether you use a GE, RCA, Philips, or another universal remote, this article will help you set it up quickly and easily. All information is verified as of August 2025.

List of Jensen TV Universal Remote Codes

Below are the universal remote codes for Jensen TVs, organized by digit count and compatible with popular remote brands like GE, RCA, Philips, and One For All. These codes are sourced from reliable websites and updated for 2025.

Jensen TV Universal Remote 3 Digit Codes

004

009

Jensen TV Universal Remote 4 Digit Codes

0004	0009
0133

Jensen TV Universal Remote 5 Digit Codes

11326	13204
10761	11299
10050	10817
11933	10815
12541	10005
12210	12726
12284

RCA Universal Remote Codes For Jensen TV

1004	1006
1196

GE & One-For-All Universal Remote Codes For Jensen TV

0004	0009
0133

Philips universal Remote Codes For Jensen TV

0002	0502
0914

Programming Instructions

Programming your universal remote for a Jensen TV is simple. Use the manual code entry method with the codes above or the auto-search method if you don’t have a code. Check your remote’s manual for specific steps, as instructions may vary slightly by brand.

Manual Code Entry

This method uses the codes listed above to program your remote.

1. Turn on your Jensen TV using the TV’s power button.
2. Press and hold the “Setup” or “Code Search” button on your remote until the LED light flashes or stays on.
3. Press the “TV” button to select TV mode.
4. Enter a 3-digit, 4-digit, or 5-digit code from the lists above.
5. Press the “Power” button to test. If the TV turns off, the code is correct.
6. If the TV doesn’t respond, repeat steps 2–5 with another code.

Auto-Search Method

If codes don’t work or you don’t have a code list, use the auto-search method to find the correct code.

1. Turn on your Jensen TV.
2. Press and hold the “TV” and “Power” buttons on your remote until the LED light stays on.
3. Release both buttons.
4. Point the remote at the TV and press the “Power” button every 3–5 seconds until the TV turns off.
5. When the TV turns off, press the “TV” or “OK/SEL” button to save the code.
6. Test the remote by turning the TV on and checking functions like volume or channels.

Troubleshooting Tips

If you’re having trouble, try these solutions:

• Verify Compatibility: Confirm your remote works with your Jensen TV model. Older remotes may not support newer TVs.
• Test All Codes: If one code fails, try others from the list, as codes vary by model and brand.
• Replace Batteries: Weak batteries can disrupt programming. Use fresh batteries.
• Use a Learning Remote: If codes don’t work, a learning remote can copy signals from your original Jensen TV remote.
• Contact Support: Check your remote’s manual or contact the manufacturer for model-specific codes.

Additional Resources

Explore these related articles on Urclist.site for more help with universal remotes:

• How To Program A Universal Remote To A Dynex TV
• GE Universal Remote Codes For Sanyo TV: Complete Guide
• Programming RCA Universal Remote Codes: A Comprehensive Guide

Conclusion

Programming your universal remote for a Jensen TV is quick and easy with the right codes and instructions. Use the 3-digit, 4-digit, or 5-digit codes provided, follow the programming steps, and refer to troubleshooting tips if needed. This guide ensures you can control your Jensen TV with a single remote, simplifying your setup. Enjoy your streamlined TV experience!

FAQs