Are you struggling to set up your Magnavox DVD player with a universal remote? Maybe you lost the original remote or just want to simplify your setup by controlling multiple devices with one remote. You’re in the right place! This updated guide will walk you through the easiest ways to program your Magnavox DVD universal remote, using simple steps and the latest tips. Plus, we’ll share a list of codes and troubleshooting ideas to make sure everything works smoothly. Let’s get started!
Magnavox is a trusted name in DVD players and universal remotes. With the right codes and a few quick steps, you can control your DVD player, TV, or other devices using just one remote. This saves time and keeps your entertainment setup hassle-free. Below, you’ll find clear instructions, a code list, and solutions to common problems—all written simply so anyone can follow along.
Magnavox DVD Player Universal Remote Codes
One of the well-known DVD player makers on the market is Magnavox. A Magnavox DVD player typically includes a remote control. But, you may program your DVD using a universal remote if for some reason you lose the remote control for your Magnavox DVD player or it becomes damaged.
Program Your Magnavox DVD Remote
Method 1: With Codes (Manual Method)
This is the fastest way if you have the right code handy. Follow these steps:
- Turn On Your DVD Player: Press the power button on the device itself.
- Pick Your Device: On your universal remote, press the “DVD” or “TV” button (depending on what you’re programming).
- Enter Learning Mode: Press and hold the “Setup” button until a light on the remote blinks or stays on.
- Type the Code: Use the number buttons to enter a code from the list above (like “424” or “0398”).
- Test It: Point the remote at your DVD player and press the “Power” button. If the player turns off, the code worked!
- Save the Code: If it works, press the “Setup” button again to lock it in. The light should blink twice.
What if it doesn’t work? Try the next code on the list and repeat the steps. Each code matches different Magnavox models, so it might take a couple of tries.
Method 2: Without Codes (Auto-Search)
Don’t have the code? No problem! The auto-search method lets your remote find it for you. Here’s how:
- Turn On Your Device: Switch on your DVD player manually.
- Activate the Remote: Press and hold the “Setup” button until the light blinks or stays lit.
- Start the Search: Press “9-9-1” on the number pad. The light might blink again.
- Scan for Codes: Press the “Power” button, then keep pressing “CH+” (channel up) slowly. The remote tests codes one by one.
- Check for Success: When your DVD player turns off, stop pressing “CH+”.
- Save It: Press “Setup” again to store the code. The light should blink twice to confirm.
This method takes a little longer, but it’s a sure way to find a working code without guessing.
Magnavox DVD Universal Remote Codes List
Before programming your remote, you’ll need the correct code for your Magnavox DVD player. These codes depend on your remote model and device. Here are some common ones:
| Brand Name | Remote Codes |
| Accurian | 0427 |
| Akai | 0428 |
| Allegro | 0440 |
| Apex Digital | 0405, 0437, 0442 |
| Bel Canto Design | 0456 |
| Blue Parade | 0411 |
| Broksonic | 0428 |
| California Audio Labs | 0406 |
| Cinea | 0438 |
| CineVision | 0440 |
| Citizen | 0428 |
| Craig | 0438, 0412, 0413, 0414, 0415 |
| CyberHome | 0433, 0444 |
| Daewoo | 0440, 0446 |
| Denon | 0406, 0466, 0517 |
| Diamond Vision | 0450 |
| Disney | 0427, 0449 |
| DVD2000 | 0410 |
| Emerson | 0427 |
| Funai | 0427 |
| GE | 0400, 0528 |
| GFM | 0427 |
| Go Video | 0529, 0429, 0430, 0440 |
| GoldStar | 0430, 0440 |
| Grundig | 0522 |
| Harman/Kardon | 0447 |
| Hello Kitty | 0438 |
| Hitachi | 0408, 0531 |
| Hiteker | 0405 |
| iLo | 0451 |
| Insignia | 0427, 0462, 0471, 0477, 0499, 0507 |
| Integra | 0411, 0532, 0463 |
| JVC | 0527, 0439, 0445, 0457, 0469, 0509 |
| Kenwood | 0406, 0526 |
| LG | 0430, 0440, 0457, 0515, 0504 |
| Magnavox | 0407, 0522, 0525, 0427, 0452, 0454, 0513 |
| Marantz | 0522 |
| McIntosh | 0402 |
| Memorex | 0428, 0438, 0449, 0464, 0508 |
| Microsoft | 0400 |
| Mitsubishi | 0409, 0410 |
| NAD | 0430 |
| Olevia | 0468 |
| Onkyo | 0407, 0532, 0463, 0506 |
| OPPO | 0518 |
| Panasonic | 0406, 0407, 0458, 0459, 0510 |
| Philco | 0427 |
| Philips | 0407, 0522, 0523, 0524, 0525, 0427, 0448, 0452, 0454, 0472, 0512 |
| Pioneer | 0411, 0423, 0426, 0456, 0473, 0519 |
| Polaroid | 0442, 0450 |
| Polk Audio | 0522 |
| Presidian | 0427 |
| Proceed | 0405 |
| Proscan | 0400 |
| RCA | 0400, 0411, 0436, 0464 |
| Rio | 0440 |
| Rotel | 0527 |
| Sampo | 0431 |
| Samsung | 0406, 0408, 0424, 0435, 0461, 0470, 0475, 0503, 0505 |
| Sansui | 0428 |
| Sanyo | 0428,0441 |
| Schneider | 0525 |
| Sharp | 0530, 0427, 0431, 0465, 0502 |
| SHERWOOD | 0520 |
| Shisonic | 0403 |
| Sonic Blue | 0440 |
| Sony | 0401, 0402, 0403, 0404, 0432, 0443, 0453, 0455, 0501 |
| Sylvania | 0427,0511 |
| Symphonic | 0427 |
| TCL | 0514 |
| Technics | 0406 |
| Theta Digital | 0411 |
| Toshiba | 0407, 0428, 0460, 0467, 0478, 0500 |
| Urban Concepts | 0407 |
| Viore | 0474 |
| Vizio | 0476,0516 |
| Xbox | 0400 |
| Yamaha | 0406, 0522, 0525, 0425, 0434, 0521 |
| Zenith | 0407, 0430, 0440 |
Magnavox DVD codes are always available since we have a detailed list of almost all home entertainment systems. Keep in mind that some types of devices require specific Magnavox DVD remote codes. When looking for the ideal Magnavox universal remote codes for DVD players and other devices, you must examine them carefully. From the list below, select the ideal code for your device:
3 Digit Code for Magnavox DVD Player
162
Magnavox DVD 4 Digit Remote Control Codes for DVD Player
Get Magnavox Universal Remote Codes for DVD Player here:
| 0981 | 0408 |
| 0969 | 0979 |
| 0915 | 0980 |
| 0914 | 0456 |
Troubleshooting Tips (When Things Don’t Work)
Sometimes, programming doesn’t go as planned. Here are simple fixes for common issues:
- Wrong Code: If the first code fails, try another from the list. Not every code works for every device.
- Dead Batteries: Swap in fresh batteries if the remote isn’t responding.
- Bad Aim: Stand within 20 feet of the DVD player and point the remote straight at it. Remove anything blocking the way.
- Reset and Retry: Take the batteries out for 5 minutes, then start over.
- Interference: Move away from bright sunlight or other electronics that might mess with the signal.
- Compatibility Check: Make sure your universal remote works with Magnavox DVD players. Look at the manual or the manufacturer’s website.
Still stuck? Try resetting your DVD player (check its manual) or contact Magnavox support for help.
Final Thoughts
Programming your Magnavox DVD universal remote is easier than it seems. With the codes and steps above, you’ll have it working in no time. Did this guide help you? Let us know in the comments below! Tell us which code worked or if you ran into any trouble—we’d love to assist. Happy watching!
FAQs
How to check if a Magnavox remote control is a universal remote
Certain Magnavox DVD remote controls are universal remote controls. This means that devices other than the Magnavox DVD player can be powered using the remote. If your Magnavox remote offers the “Set” and “Mode” choices, it is likely a universal remote. It is a universal remote if it does.
How do I program my one-for-all universal remote to my DVD player?
Turn on a desired device (e.g., VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). …
On the remote control, press a device key once (i.e., DVD/VCR, CBL/SAT, or TV). …
Press and hold SET until the LED (red light) blinks twice, then release SET.