Memorex DVD Universal Remote Codes: A Simple Guide

If you’ve got a Memorex DVD player and want to control it with a single universal remote, you’re in the right place. This guide will walk you through everything you need to know—step-by-step instructions, remote codes, and handy tips to make your home entertainment setup easier. No more juggling multiple remotes! Let’s get started with clear, simple directions that anyone can follow.

Why Use a Universal Remote for Your Memorex DVD Player?

A universal remote lets you manage your DVD player and other devices, like your TV or cable box, with one tool. It saves time, reduces clutter, and makes watching movies or shows more enjoyable. To make it work, you’ll need the right codes and a few easy steps. Don’t worry—I’ll explain it all plainly.

How to Program Your Memorex DVD Universal Remote

There are three main ways to set up your remote: using a code manually, searching for a code automatically, or finding the code without one. I’ll break each method down so you can pick what’s easiest for you.

Method 1: Manual Programming with a Code

This is the fastest way if you have the right code ready.

1. Turn on your Memorex DVD player.
2. Press the “DVD” button on your universal remote (or “AUX” if there’s no DVD option).
3. Hold the “Setup” button until a light blinks or stays on. This means the remote is ready to learn.
4. Enter one of the codes from the list above using the number buttons (like 2003 or 31270).
5. Point the remote at the DVD player and press the “Power” button.
6. If the DVD player turns off, the code worked! Turn it back on and test other buttons (play, stop, menu) to make sure everything’s good.
7. If it doesn’t work, repeat the steps with a different code.

Method 2: Code Search (When You’re Unsure of the Code)

If the codes above don’t work or you want the remote to find one for you, try this.

1. Turn on your Memorex DVD player.
2. Press and hold the “Setup” button until the light blinks or stays lit.
3. Enter “9-9-1” using the number buttons. This starts the search mode.
4. Point the remote at the DVD player and press the “Power” button, then the “Channel Up” button slowly, one press at a time.
5. Keep going until the DVD player turns off. When it does, press “Setup” again to save the code.
6. Test the remote to confirm it controls the DVD player.

Method 3: Programming Without a Code (Auto-Search)

This method scans all possible codes until it finds the right one.

1. Turn on your Memorex DVD player.
2. Press and hold the “Setup” button for 3 seconds. The light should blink or stay on.
3. Press the “DVD” button (or “AUX” if needed).
4. Press “Channel Up” or “Channel Down” repeatedly until the DVD player responds (like turning off).
5. When it works, press the “Power” button to test. If it’s good, press “Setup” to lock in the code.

How to Find Your DVD Player’s Remote Code

If you’re curious about your DVD player’s specific code or the listed ones aren’t working, you can figure it out yourself. Here’s how:

1. Turn on your Memorex DVD player.
2. Press the “DVD” or “AUX” button on your remote.
3. Hold the “Setup” button until the light blinks.
4. Type “9-9-0” on the number pad.
5. Press “1” and count how many times the light blinks. That’s the first digit of your code. Write it down.
6. Repeat with “2” for the second digit, “3” for the third, and so on, until you have the full code (4 or 5 digits).

This trick helps you discover the exact code your remote is using.

Memorex DVD Universal Remote Codes

Below are the codes you’ll need to program your universal remote for a Memorex DVD player. These numbers tell the remote how to talk to your device. Pick the code that matches your remote’s brand and the number of digits it uses (4 or 5).

Memorex DVD Universal Remote 4 Digit Codes

• 2003
• 2424
• 0722
• 1297
• 3349

Memorex DVD Universal Remote 5 Digit Codes

• 31270
• 32213
• 20695
• 20831
• 21270
• 30695
• 30831

RCA Universal Remote Codes for Memorex DVD players

• 3391
• 3384

One-For-All Universal Remote Codes for Memorex DVD players

• 0797
• 0854

GE Universal Remote Codes for Memorex DVD players

• 0446
• 0394

Philips Universal Remote Codes for Memorex DVD players

• 1413
• 1913
• 0246
• 1606

Read Also:magnavox dvd player universal remote codes

Troubleshooting: What to Do If It Doesn’t Work

Sometimes things don’t go smoothly. Here are quick fixes for common problems:

• Wrong Code: Double-check the code you entered. Try another one from the list.
• Dead Batteries: Swap in fresh batteries and make sure they’re placed correctly.
• Out of Range: Stand closer to the DVD player (within 20 feet) and point the remote straight at it.
• Blocked Signal: Remove anything between the remote and the DVD player, like furniture or decorations.
• Reset and Retry: Take the batteries out for a few minutes, then start over.
• Compatibility: Make sure your universal remote works with Memorex devices. Check the manual or the manufacturer’s website.
• Interference: Avoid bright sunlight or other remotes nearby—they can mess with the signal.

If nothing works, reach out to Memorex support or consider a new universal remote known to pair well with their DVD players.

Final Thoughts

Programming your universal remote for a Memorex DVD player is straightforward once you have the right code and steps. Whether you use the manual method, code search, or auto-search, you’ll soon have one remote to rule them all. If one code fails, don’t give up—try another from the list and save the winner for next time. Enjoy your movies without the hassle!

FAQs