3, 4, 5 Digit Ocosmo TV Universal Remote Codes

If you want to control your Ocosmo TV with a universal remote, this guide has you covered. Below, you’ll find a complete list of 4-digit and 5-digit universal remote codes for Ocosmo TVs, along with step-by-step instructions to program your remote. While 3-digit codes are less common for Ocosmo TVs, we’ll address how to handle them. This guide is up-to-date as of June 2025 and designed to be clear and easy to follow.

List of Universal Remote Codes for Ocosmo TV

Below are the universal remote codes for Ocosmo TVs, gathered from trusted sources. These codes work with most universal remotes, including brands like GE, RCA, Philips, and One-For-All.

Ocosmo TV Universal Remote 5 Digit Codes

13899	10810
10878	11599
10000	11360
10889

How to Program Your Universal Remote for Ocosmo TV

Programming your universal remote to work with your Ocosmo TV is simple. You can use one of two methods: auto-search (code search) or manual code entry. Follow the steps below carefully.

Method 1: Auto-Search (Code Search)

This method scans through all possible codes until it finds one that works with your TV.

1. Turn on your Ocosmo TV manually.
2. Press and hold the “TV” button on your universal remote until the indicator light turns on or flashes.
3. Press the “CH+” or “CH-” button repeatedly until your TV turns off.
4. Once the TV turns off, press the “Power” button to verify. If the TV turns on, the remote is programmed.
5. To save the setting, press the “TV” button again (the light may blink twice).

Method 2: Manual Code Entry

This method uses a specific code from the list above.

1. Turn on your Ocosmo TV manually.
2. Press and hold the “Setup” button on your universal remote until the indicator light turns on.
3. Enter a 4-digit or 5-digit code from the list above using the number buttons.
4. Point the remote at the TV and press the “Power” button. If the TV turns off, the code is correct.
5. If the TV does not respond, repeat steps 2-4 with another code from the list.

Troubleshooting Common Issues

If you run into problems while programming your universal remote, try these solutions:

• Remote Not Working After Programming:
  • Check that the batteries are fresh and correctly inserted.
  • Ensure you’re pointing the remote directly at the TV with no obstructions.
  • Try another code from the list above.
• TV Turns Off but Other Functions Don’t Work:
  • Some codes only control basic functions like power. Try a different code to access full functionality, such as volume or menu navigation.
• How to Reset the Universal Remote:
  • Press and hold the “Setup” button for 5-10 seconds until the light flashes. This resets the remote to factory settings, allowing you to start over.

Conclusion

Using a universal remote with your Ocosmo TV is simple with the right codes and steps. This guide provides a complete list of 4-digit and 5-digit codes, along with clear instructions for programming and troubleshooting. Whether you use the auto-search method or manual code entry, you can set up your remote quickly. If you face issues, our troubleshooting tips and FAQs should help. For more TV remote guides, check out other posts on Urclist.site.

FAQ’s