Onn Universal Remote codes for DVD player

The Onn Universal Remote is a budget-friendly device that simplifies controlling multiple electronics, including DVD players, TVs, streaming devices, and soundbars. To use it with a DVD player, you need the correct codes to program the remote. This guide provides a comprehensive list of Onn Universal Remote codes for DVD players, step-by-step programming instructions, troubleshooting tips, and answers to common user questions. Whether you’re setting up a new remote or replacing a lost one, this article will help you get your Onn Universal Remote working with your DVD player.

Codes for Onn DVD Players

Below are the most commonly reported codes for Onn DVD players, sourced from user forums and reliable websites. Note that some Onn remotes use four-digit codes, while others may require three-digit codes (drop the first zero if needed).

Onn Universal Remote Codes For LG DVD Player

• 0591
• 0741
• 0571
• 0801
• 1906
• 0869
• 1983
• 2039
• 2270
• 2297
• 2303
• 2339
• 2352
• 2363
• 2368
• 2371
• 2418

Onn Universal Remote Codes For Magnavox DVD Player

• 5006
• 5009
• 5012
• 5018

Onn Universal Remote Codes For Samsung DVD Player

• 5014
• 5018
• 5027
• 5031

Onn Universal Remote Codes For Sony DVD Player

• 5048
• 5117
• 5150
• 5179
• 5197

Onn Universal Remote Codes For GPX DVD Player

5074

Onn Universal Remote Codes For Philips DVD Player

• 5009
• 5017
• 5018
• 5033
• 5034

Onn Universal Remote Codes For Craig DVD Player

• 5012
• 5028
• 5071
• 5074
• 5091

Onn Universal Remote Codes For Curtis DVD Player

• 5018
• 5027
• 5028
• 5050

Onn Universal Remote Codes For Memorex DVD Player

• 5018
• 5028
• 5060
• 5074

Onn Universal Remote Codes For Panasonic DVD Player

• 5008
• 5011

Onn Universal Remote Codes For Sanyo DVD Player

• 5005
• 5014
• 5027
• 5060
• 5073

Onn Universal Remote Codes For Toshiba DVD Player

• 5008
• 5014
• 5043
• 5055
• 5056

Programming the Onn Universal Remote

You can program your Onn Universal Remote in two ways: manually with codes or automatically without codes. Both methods are straightforward and can be completed in a few steps. Below are detailed instructions for each method, based on guides from ytechb.com, boostvision.tv, and WikiHow.

Method 1: Programming with Codes

This method uses a specific code to pair the remote with your DVD player.

1. Turn on your DVD player. Ensure it’s powered on and not in standby mode.
2. Press and hold the “Setup” button. Hold it until the red LED light under the “Power” button turns on.
3. Press the “DVD” button. The LED light will blink once and stay solid.
4. Enter a 4-digit code. Use the number buttons to enter a code from the list above (e.g., 0067). The LED will blink twice if the code is accepted.
5. Test the remote. Press the “Power” button to see if the DVD player turns off. If it does, the code is correct. If not, repeat steps 2–4 with another code.

Method 2: Programming without Codes (Auto-Search)

If you don’t have a working code, use the auto-search method to let the remote find the correct code.

1. Turn on your DVD player. Ensure it’s powered on.
2. Press and hold the “Setup” button. Hold it until the red LED light under the “Power” button turns on.
3. Press the “DVD” button. The LED light will blink once and stay solid.
4. Press and hold the “OK” button. Point the remote at the DVD player and hold the “OK” button until the DVD player turns off.
5. Release the “OK” button. The remote will lock in the correct code.
6. Test the remote. Use the remote to control the DVD player (e.g., play, pause, stop). If it doesn’t work, repeat steps 2–5.

Troubleshooting

If your Onn Universal Remote doesn’t work with your DVD player, try these troubleshooting steps:

• Test multiple codes: If the first code fails, try others from the list.
• Check battery levels: Ensure the remote’s batteries are fresh and properly inserted.
• Ensure device is on: The DVD player must be fully powered on, not in standby mode.
• Clear line of sight: Remove any obstructions between the remote and the DVD player.
• Reset the remote: Perform a factory reset if needed:
  1. Remove a battery from the remote.
  2. Press any button on the remote.
  3. Reinsert the battery; the LED should blink twice.
  4. Press and hold the “2” and “8” buttons simultaneously for 6 seconds.
  5. Enter the code “981”; the LED will blink four times to confirm the reset.

Different Models of Onn Universal Remotes

Onn offers several universal remote models, each designed for different needs. Knowing your model can help you find the right codes and instructions.

Model	Description
Onn 4-Device Universal Remote	Controls up to 4 devices, including TVs, DVD players, cable boxes, and audio systems. Known for its simple setup and user-friendly design.
Onn 6-Device Universal Remote	Controls–

up to 6 devices, including TVs, DVD players, streaming devices, and soundbars. Features a streamlined layout with easy access to frequently used buttons.

To identify your model, check the packaging or the model number on the back of the remote. This information is crucial for finding compatible codes.

Conclusion

Programming your Onn Universal Remote to work with a DVD player is simple with the right codes and instructions. Use the provided codes for Onn DVD players, follow the programming steps, and refer to troubleshooting tips if needed. For the latest codes, check official sources like Onn Remotes or the Walmart product page. This guide, accurate as of June 2025, aims to make your setup process quick and easy, so you can enjoy controlling your DVD player with ease.

FAQs