Philips DVD Player Universal Remote Codes & Program Instructions

If you own a Philips DVD player and want to control it with a single universal remote, you’re in the right place. This guide will walk you through simple steps to program your remote using easy methods and provide helpful tips to make it work smoothly. No more juggling multiple remotes—just one to rule them all! Let’s get your home entertainment system ready for action.

Why Use a Universal Remote with Your Philips DVD Player?

A universal remote simplifies your setup by letting you control your DVD player, TV, and other devices with one tool. It saves time, reduces clutter, and makes movie nights or TV marathons more enjoyable. Below, you’ll find clear instructions and codes to get started.

How to Program Philips DVD Universal Remote

Method 1: Auto-Search Programming (No Codes Needed)

This method lets your remote scan for the right code automatically. Here’s how to do it:

1. Turn On Your DVD Player
   Switch on your Philips DVD player using its power button.
2. Prepare the Remote
   Press and hold the “DVD” button and the “OK/SEL” button together for 3 seconds. A small light on the remote will turn on, showing it’s ready.
3. Start the Search
   Point the remote at the DVD player. Press the “CH+” or “CH-” button repeatedly. The remote will test different codes one by one.
4. Check for Power Off
   Keep pressing until the DVD player turns off. This means the remote found a working code.
5. Test the Code
   Press the “Power” button. If the DVD player turns back on, try other buttons like “Play” or “Stop” to make sure it works.
6. Save the Code
   Press the “DVD” button again. The light will blink twice, locking in the code.

Done! Your remote should now control your DVD player.

Method 2: Manual Programming with Codes

If you have a code list (usually in your remote’s manual), this method is faster. Follow these steps:

1. Power Up
   Turn on your Philips DVD player.
2. Select the Device
   Press the “DVD” button on your universal remote.
3. Enter Learning Mode
   Hold the “Setup” button until the remote’s light flashes. This means it’s ready to learn.
4. Input the Code
   Type in a 4-digit code from your remote’s manual (common Philips codes include 0506, 0521, or 0675). Check your booklet for the full list.
5. Test It Out
   Point the remote at the DVD player and press “Power.” If it turns off, you’re good to go. If not, try another code.
6. Finish Up
   When it works, let go of the “Power” button. Your remote is now programmed!

Method 3: Code Search Programming

If you don’t have a code handy, use this method to let the remote find one for you:

1. Switch On
   Turn on your DVD player.
2. Activate Search Mode
   Press and hold the “Setup” button until the light flashes.
3. Enter the Magic Number
   Type “9-9-1” on the remote. This starts the search.
4. Find the Code
   Hold the “Power” button and press “CH+” over and over until the DVD player shuts off.
5. Lock It In
   Release “Power” and test other buttons. If they work, you’re set!

This takes a bit longer, but it’s a sure way to find the right code.

Philips DVD Player Universal Remote Code List

3 Digit Codes

• 362
• 370
• 387
• 396
• 398
• 400
• 408
• 423
• 437
• 755
• 891

4 Digit Codes

• 0885
• 2033
• 0503
• 2318
• 2404
• 2051
• 2109
• 2091
• 2033
• 1911
• 1914
• 0646
• 2302
• 2318
• 2243

5 Digit Codes

• 22434
• 21506
• 21276
• 22084
• 20503
• 20646
• 21340
• 21354
• 22506
• 20675
• 21158

Read Also: Sylvania DVD Player Universal Remote Codes

Troubleshooting: What to Do If It Doesn’t Work

Sometimes things don’t go as planned. Here’s how to fix common issues:

• Check Compatibility
  Make sure your remote works with your Philips DVD player model. Look in the remote’s manual or on the Philips website.
• New Batteries
  Swap out old batteries for fresh ones. Weak power can mess up the signal.
• No Obstacles
  Keep a clear path between the remote and DVD player when programming.
• Right Mode
  Ensure the DVD player is on and set to “DVD” mode, not TV or another input.
• Reset and Retry
  Reset your remote (check the manual for how) and start over.
• Try More Codes
  If one code fails, test others from the list or use the auto-search method.
• Ask for Help
  Still stuck? Call Philips customer support for model-specific advice.

With a little patience, you’ll get it working.

Final Thoughts

Setting up your Philips DVD player with a universal remote is a simple way to improve your home entertainment. Whether you use auto-search, manual codes, or the code search method, you’ll soon have everything under control with one remote. Need more help or codes? Feel free to reach out—we’re here to assist!

FAQs