RCA Soundbar Remote Control Codes: Complete Guide

RCA soundbars are known for their quality sound and easy setup, making them a great addition to your home entertainment system. If you’ve lost your original remote or want to use a universal remote, you’ll need the right codes and instructions to program it. This guide offers a comprehensive list of 5-digit remote codes, step-by-step programming instructions, and troubleshooting tips to help you control your RCA soundbar effortlessly. Whether you’re using a universal, TV, cable, or satellite remote, we’ve got you covered with clear, simple steps.

List of RCA Soundbar Remote Codes

Below are the most reliable 5-digit remote codes for RCA soundbars, based on information from trusted sources. These codes are compatible with models like RTS7010B, RTS7110B-2, RTS7131B, RTS7340SB, RTS736W, RTD3266, and RTS635. If your model isn’t listed, these codes should still work for most RCA soundbars.

RCA Soundbar 5 Digit Remote Control Codes
Most likely to work:

• 20060
• 31254
• 30531

RCA Soundbar Universal Remote 5 Digit Codes

21060	33969
30360	31390
31459	21014
30823	31511
20042	20035
32041	33295
33091	30531
31023	33297
31390	21035
32426	31963
31609	20807
33363	31023
20149	32655

How to Program Your Universal Remote

Programming a universal remote to control your RCA soundbar is straightforward. Follow these steps to enter the codes manually:

1. Turn on your RCA soundbar using the power button on the device.
2. Find the “Setup” button on your universal remote. It may be labeled differently, like “Code Search” or “Program.”
3. Press and hold the “Setup” button until the LED light on the remote flashes twice, indicating it’s in programming mode.
4. Enter a 5-digit code from the list above using the number buttons on your remote.
5. Press the “Power” button and aim the remote at your soundbar. If the soundbar turns off, the code is correct.
6. Repeat steps 3-5 with different codes if the first one doesn’t work.

Using the Code Search Feature

If you’re unsure which code to use, the code search feature on many universal remotes can automatically find the correct code. Here’s how:

1. Turn on your RCA soundbar.
2. Press and hold the “Setup” button until the LED flashes twice.
3. Press and hold the “Power” button. Keep holding until the soundbar turns off, which may take a few seconds as the remote cycles through codes.
4. Release the “Power” button when the soundbar turns off. The remote has found the correct code.

Specific Instructions for Comcast Remote

If you’re using a silver Comcast remote with a red OK/Select button, follow these steps:

1. Turn on your RCA soundbar.
2. Press the “Aux” button once.
3. Press and hold the “Setup” button until the key blinks twice.
4. Release the “Setup” button.
5. Enter 9 9 1 3.
6. The Aux key will blink twice.
7. Press the “Power” button and aim the remote at the soundbar.
8. Press the “CH+” button until the soundbar turns off.
9. Press “Setup” once to lock in the code (Aux key blinks twice).

Troubleshooting

If your universal remote isn’t working with your RCA soundbar, try these solutions:

• Check Power and Range: Ensure your soundbar is powered on and within 10-15 feet of the remote.
• Replace Batteries: Use fresh batteries in your remote to ensure strong signal transmission.
• Clear Obstructions: Remove any objects blocking the line of sight between the remote and the soundbar.
• Check IR Settings: Some soundbars require a specific input or mode to accept IR signals. Refer to your soundbar’s manual.
• Model-Specific Codes: If none of the codes work, visit RCA’s remote code finder for model-specific codes.

Additional Tips

• Find Your Model Number: Check the back or bottom of your soundbar for the model number to ensure compatibility with the codes.
• Check Remote Compatibility: Confirm your universal remote uses IR signals, as some RCA soundbars may not support RF remotes.
• Stay Updated: For the latest codes or new RCA soundbar models, check urclist.site regularly.

Conclusion

This guide provides everything you need to program your universal remote for your RCA soundbar. With the listed codes, step-by-step instructions, and troubleshooting tips, you should be able to set up your remote quickly. If you encounter issues or have a specific model, leave a comment below, and we’ll help you find the right solution. For more remote programming guides, check out our other articles on Urclist.site.

FAQs