A lost or broken TV remote can disrupt your viewing experience. An RCA universal remote offers a simple solution by controlling your Samsung TV and other devices with one device. This guide provides the latest RCA universal remote codes for Samsung TVs and clear instructions to program your remote. We’ve compiled information from reliable sources to ensure accuracy and ease of use as of June 2025.
RCA Universal Remote Codes for Samsung TV
RCA universal remotes require specific codes to pair with Samsung TVs. These codes are either 4 or 5 digits, depending on your remote model. Below is a comprehensive list of codes that should work with most Samsung TVs:
4 Digit Codes
| 0812 | 1004 |
| 0060 | 1005 |
| 2051 | 1006 |
| 0702 | 1012 |
| 1060 | 1013 |
| 0178 | 1015 |
| 1017 | 1019 |
| 1082 | 1104 |
| 1171 | 1105 |
| 1252 | 1196 |
| 1172 | 1106 |
| 1446 | 1201 |
| 1444 | 1014 |
| 1375 | 1445 |
| 1378 | 1387 |
| 1025 | 1009 |
| 1056 | 1204 |
| 1436 | 1065 |
| 1069 | 1078 |
| 1123 | 1102 |
| 1083 | 1103 |
| 1123 | 1124 |
| 1194 | 1205 |
5 Digit Codes:
| 10812 | 10054 |
| 10060 | 10702 |
| 10178 | 10030 |
| 10056 | 10650 |
| 10766 | 10814 |
| 11060 |
How to Program Your RCA Universal Remote
Programming your RCA universal remote is straightforward. Follow these steps to pair it with your Samsung TV:
- Install Batteries: Ensure your remote has fresh batteries.
- Turn On Your TV: Manually power on your Samsung TV.
- Hold a Button: Press and hold the “TV” button on your remote until the power light stays on.
- Enter the Code: While holding the “TV” button, enter a 4-digit or 5-digit code from the list above using the number buttons.
- Test the Remote: Release the “TV” button. If the power light stays on, test the remote by pressing the power, volume, or menu buttons. If the light blinks four times, the code is incorrect—try another code.
Auto-Search Programming Method
If none of the codes work, some RCA universal remotes offer an auto-search feature to find the correct code automatically:
- Turn on your Samsung TV.
- Press and hold the “TV” button until the power light stays on.
- Press and release the “Power” button, then immediately press and hold the “TV” button again.
- The remote will cycle through codes until the TV turns off or the power light indicates a match.
- Test the remote to confirm it works.
This method is useful if you’re unsure of the correct code or if your remote model supports auto-search.
Troubleshooting
If your RCA universal remote doesn’t work after trying the codes, try these solutions:
- Check Batteries: Ensure batteries are fresh and correctly installed.
- Verify Code Entry: Double-check that you’re entering the correct number of digits (4 or 5) and the right code.
- Confirm Compatibility: Most Samsung TVs work with RCA universal remotes, but older models may require specific codes. Check your TV’s manual or the RCA Support page.
- Try Auto-Search: Use the auto-search method if manual codes fail.
- Contact Support: If issues persist, reach out to RCA’s customer support for assistance.
Conclusion
Pairing your RCA universal remote with your Samsung TV is simple with the right code and steps. Use the 4-digit or 5-digit codes provided, follow the programming instructions, and troubleshoot if needed. If one code doesn’t work, try another or use the auto-search feature. For more help, visit the RCA Support page or explore related articles on Urclist.site for tips on universal remotes and TV setups.
FAQ’s
How do I enter my RCA universal remote code?
From the above given codes, locate the code for your device. Point your remote control at the gadget you want to control after turning it on. The remote’s button for your device must be pressed and held. Press and type your device code.
Why won’t my RCA universal remote connect to my TV?
Reset the remote. To reset the remote’s microprocessor, remove the batteries and then press and hold the number 1 key for a few seconds. Reinstall the batteries, push the ON/OFF key, and then release the number 1 key. If it comes on, try again after reprogramming the remote.
How do I program a universal remote without a code?
Hold down the Power button as well as the button for the object you want your remote set up for. When instructed, let go of both buttons. You can release the button and the Power button once the LED light on your remote control turns on and stays on. Point your remote control at the object you wish to set it up for.