Sanyo Soundbar Universal Remote Codes and Programming Guide

Losing your original Sanyo Soundbar remote or wanting to control multiple devices with one universal remote is a common need. This guide provides a comprehensive list of universal remote codes for Sanyo Soundbars and step-by-step instructions to program your remote. Whether you’re using a general universal remote or a specific brand like ATT, DIRECTV, or Comcast, this post covers everything you need to know to get your remote working in 2025.

List of Universal Remote Codes for Sanyo Soundbar

Below is a complete list of universal remote codes for Sanyo Soundbars, organized by the number of digits. These codes have been verified to work with models like FWSB415E, FWSB405FS, FW405SB, and FWSB405F, based on information from reliable sources .

Sanyo Soundbar Universal Remote 3 Digit Codes

590	611
627	661
683

Sanyo Soundbar Universal Remote 4 Digit Codes

0157	1156
1166	1176

Sanyo Soundbar Universal Remote 5 Digit Codes

20047	10154
10159	10051
10250	20035
30189	30531
20081	21593
20593	20000
20039	20149
21781

How to Program Your Universal Remote to Sanyo Soundbar

Programming a universal remote to your Sanyo Soundbar is simple if you follow the right steps. Below are several methods, starting with the most common. Choose the one that matches your remote’s features.

General Programming Method

1. Turn on your Sanyo Soundbar.
2. Point your universal remote at the soundbar.
3. Press the ‘Menu’ button, then select ‘Settings’, then ‘Program Remote’, and choose ‘SOUND’.
4. When the remote’s light blinks 4 times, enter a code from the list above.
5. If the light turns off, the code is correct. If not, try another code.
6. Test the remote’s function keys, like volume up/down, to confirm it works.

Alternative Programming Method

1. Press and hold the ‘PROG’ button until the LED light on your remote turns on.
2. Select the ‘Soundbar’ option if prompted.
3. Enter a code from the list above.
4. If the code is correct, the LED light will turn off.

Auto Search Method

1. Turn on your Sanyo Soundbar.
2. Press and hold the device button (e.g., ‘TV’ or ‘AUX’) for 3 seconds until the LED light flashes.
3. Press and release ‘CH+’ or ‘CH-‘ repeatedly until the soundbar turns off.
4. Release the buttons when the soundbar turns off.
5. Press the device button again to save the code.

Manual Method

1. Turn on your Sanyo Soundbar.
2. Press the ‘TV’ button on your universal remote.
3. Hold the ‘Setup’ button until the LED light flashes.
4. Enter a 4-digit or 5-digit code from the list.
5. Hold the ‘Power’ button until the soundbar turns off.

Code Search Method

1. Turn on your Sanyo Soundbar.
2. Hold the ‘Setup’ button until the LED light flashes.
3. Enter ‘9-9-1’ using the number buttons.
4. Hold the ‘Power’ button and press ‘CH+’ repeatedly until the soundbar turns off.
5. Release the buttons when the soundbar turns off.

Specific Instructions for Popular Remotes

If you have a specific brand of universal remote, follow these tailored instructions.

ATT Remote RC7X

1. Press ‘MENU’ on your remote.
2. Go to ‘SETTINGS’.
3. Select ‘SETTINGS & HELP’.
4. Choose ‘REMOTE CONTROL’.
5. Select ‘AUDIO DEVICE’ and follow the on-screen instructions .

DIRECTV Remote

1. Turn on your Sanyo Soundbar and set the volume up but muted.
2. Select ‘AV1’ or ‘AV2’ on your TV.
3. Press and hold ‘MUTE’ and ‘SELECT’ buttons until the remote blinks twice.
4. Enter ‘991’ and wait for two blinks.
5. Enter ‘3’.
6. Press and release ‘VOL UP’.
7. Point the remote at the soundbar and press ‘CH UP’ repeatedly until the volume changes.
8. Press ‘SELECT’ to lock in the code.

Comcast Silver Remote

1. Turn on your Sanyo Soundbar.
2. Press ‘AUX’ once.
3. Hold ‘Setup’ until the remote blinks twice.
4. Enter ‘9913’.
5. Press ‘Power’ and aim the remote at the soundbar.
6. Press ‘CH+’ until the soundbar turns off.
7. Press ‘Setup’ once to lock the code.

Comcast Xfinity Remote

• To program: Press ‘aux’, hold ‘setup’ until it blinks twice, enter a code from the list.
• To lock: Hold ‘setup’ until it blinks twice, enter ‘993’, press ‘aux’.
• To unlock: Hold ‘setup’ until it blinks twice, press ‘993’, then ‘VOL+’ once.

Troubleshooting Tips

If the codes don’t work, try these steps:

• Check Compatibility: Ensure your universal remote is compatible with your Sanyo Soundbar model.
• Replace Batteries: Use fresh batteries to avoid weak signals.
• Try Multiple Codes: Not all codes work for every model, so test each one.
• Use Code Search: If no codes work, try the code search method, which may take several attempts.
• Consult the Manual: Check your remote’s manual for specific instructions, as methods can vary.

Additional Information

How to Check if Your Remote is Universal

Look for ‘Set’ and ‘Mode’ buttons on your remote. If present, it’s likely a universal remote capable of programming for your Sanyo Soundbar.

Turning On Sanyo Soundbar Without Remote

For models like FWSB415E and FWSB405FS, you can use a mobile app TV remote or universal remotes like GE, RCA, or Vizio to turn the soundbar on or off .

Compatible Models

The codes listed above are reported to work with Sanyo Soundbar models such as:

• FWSB415E
• FWSB405FS
• FW405SB
• FWSB405F

Resetting Your Sanyo Soundbar

To reset your Sanyo Soundbar, locate the reset button (usually on the back or bottom) and press it with a pin for a few seconds. This restores factory settings, which may help if the soundbar isn’t responding.

Conclusion

This guide provides everything you need to program your universal remote for your Sanyo Soundbar in 2025. With a comprehensive list of codes and multiple programming methods, you should be able to get your remote working quickly. If you encounter issues, use the troubleshooting tips or try a different code or method. Share your experience or ask questions in the comments below!

FAQ’s

Visit Also:

• Pyle Soundbar Universal Remote Codes
• Sceptre Soundbar Universal Remote Codes
• Logik Soundbar Universal Remote Codes
• Programming Sanyo Universal Remote Codes
• Programming Innovage Jumbo Universal Remote Codes