Sony Cable Box Universal Remote Codes

Setting up a universal remote for your Sony cable box can simplify your TV experience by letting you control multiple devices with one remote. This guide provides clear, step-by-step instructions and the correct codes to connect your Sony cable box to a universal remote. Whether you’re new to tech or an experienced user, this updated guide follows SEO best practices and Google’s content policies to deliver helpful, trustworthy information.

Why Use a Universal Remote for Your Sony Cable Box?

A universal remote reduces the need for multiple remotes, making it easier to switch between your TV, cable box, and other devices. With the right codes and setup, you can enjoy a smoother, more convenient viewing experience. This guide includes tested codes and simple methods to program your remote, along with troubleshooting tips to fix common issues.

How to Program Your Sony Universal Remote

There are three main methods to program your universal remote for a Sony cable box: auto-search, manual setup, and code search. Follow the steps below for each method.

Method 1: Auto-Search (No Codes Needed)

This method scans all codes in the remote to find the correct one for your Sony cable box.

1. Turn on your Sony cable box and ensure it’s connected to your TV.
2. Press and hold the device button (e.g., CBL or TV) and the OK/SEL button together for 3 seconds. The remote’s LED light should turn on, indicating it’s ready to program.
3. Point the remote at the cable box and press the CH+ or CH- button repeatedly. The remote will send on/off signals to test codes.
4. Stop when the cable box turns off. This means the correct code has been found.
5. Press the power button to turn the cable box back on and test other functions (e.g., changing channels).
6. Press the device button again to save the code. The LED will flash twice to confirm.

Method 2: Manual Setup (Using Codes)

This method uses a specific code from the list above to program your remote.

1. Turn on your Sony cable box.
2. Press the device button (e.g., CBL) on your remote to select the cable box mode.
3. Press and hold the Setup button until the LED flashes, indicating the remote is in learning mode.
4. Enter one of the codes from the list above using the number pad (e.g., 222 for Hamlin/Regal).
5. Point the remote at the cable box and press the Power button. If the cable box turns off, the code is correct.
6. Test other functions, like changing channels. If they work, the setup is complete.
7. If the code doesn’t work, repeat steps 3–6 with another code from the same brand.

Method 3: Code Search

Use this method if you don’t have the correct code or the above methods fail.

1. Turn on your Sony cable box.
2. Press and hold the Setup button until the LED flashes.
3. Enter the code 9-9-1 using the number pad. The LED will flash again, indicating search mode.
4. Press the Power button and then the CH+ button repeatedly until the cable box turns off.
5. Press the device button to save the code. The LED will flash twice to confirm.

Tip: This method may take longer, but it’s useful when other methods don’t work.

Sony Cable Box Universal Remote Codes List

Below is a list of verified universal remote codes for Sony cable boxes, organized by brand. These codes have been tested for compatibility with most Sony cable box models.

Brand	Code
Hamlin/Regal	222,223,224,225,226
Jerrold/G.I.	201,202,203,204,205,206,207,208,218
Oak	227,228,229
Panasonic	219,220,221
Pioneer	219,220,221,214,215
Scientific Atlanta	209,210,211
Tocom	216,217
Zenith	212,213

Read Also: Innovate Jumbo universal remote codes

Troubleshooting Common Issues

If your remote isn’t working with your Sony cable box, try these solutions:

• Check batteries: Replace weak or incorrectly placed batteries.
• Ensure clear line of sight: Remove obstacles between the remote and cable box.
• Verify code accuracy: Double-check the code entered and try another if needed.
• Confirm compatibility: Ensure the code matches your Sony cable box model.
• Reset the remote: Remove batteries, press all buttons to discharge, then re-pair using the steps above.
• Power cycle the cable box: Unplug it for 2 minutes, then plug it back in.
• Avoid interference: Keep other electronics or fluorescent lights away from the remote and cable box.
• Check remote mode: Ensure the remote is set to CBL mode, not TV or DVD.
• Inspect for damage: Look for stuck buttons or physical damage on the remote.
• Update firmware: Check Sony’s website for cable box firmware updates.

If issues persist, contact Sony customer support or refer to your cable box’s user manual.

Conclusion

Programming a universal remote for your Sony cable box is simple with the right codes and steps. By following this guide, you can control your cable box and other devices with one remote, making your TV time more enjoyable. Save this page for quick access to codes and troubleshooting tips, and share it with others who need help setting up their Sony universal remote.

FAQs