GE Universal Remote CL4 Codes For Element TV

Using a single remote to control your devices simplifies your home entertainment setup. The GE Universal Remote CL4, manufactured after 2016, is a reliable choice for controlling your Element TV. This guide provides the specific 4-digit codes needed to program your CL4 remote, step-by-step instructions, and troubleshooting tips to ensure a smooth setup. Written in clear, simple English, this post aims to help you get your remote working quickly. All information is up-to-date as of June 2025, sourced from trusted websites.

Table of Contents

GE Universal Remote CL4 Codes for Element TV

The following codes are for GE Universal Remote CL4 models, designed for Element TVs:

5421	2401
5471	1651
1091	5831
5341	6021
5361	6171
5841	2891
1741

How to Program Your GE Universal Remote

Programming your GE Universal Remote CL4 is simple. Follow these steps:

Turn On Your TV: Ensure your Element TV is powered on.
Locate the Setup Button: Find the “Setup” button, typically near the top or side of the remote.
Enter Setup Mode: Press and hold “Setup” until the red light stays on, then release.
Select Device Mode: Press the “TV” button to indicate you’re programming for a TV.
Enter the Code: Use the number keypad to input one of the codes listed above. The red light should turn off.
Test the Remote: Point the remote at the TV and press “Power.” If the TV turns off, the code is correct. If not, repeat steps 3–5 with another code.

For additional guidance, check our other articles on urclist.site.

Troubleshooting

If the codes don’t work, try these solutions:

Confirm Remote Model: Open the battery compartment and look for the CL4 label. Other models (CL3, CL5, CL6) use different codes.
Use Auto Code Search: If manual codes fail, try the Auto Code Search feature. Instructions are available at Jasco’s Auto Code Search page.
Reset the Remote: To reset, hold “Setup” until the red light appears, then press “Mute” followed by “0.” This clears previous settings.
Check Batteries: Ensure the batteries are fresh and properly inserted.
Contact Support: Reach out to Jasco at (800) 654-8483, available Monday–Friday, 7 AM–6 PM CDT.

Conclusion

Programming your GE Universal Remote CL4 for your Element TV is quick and easy with the right codes and steps. This guide provides verified codes, clear instructions, and troubleshooting tips to help you succeed. If you need more help, explore related articles on Urclist.site or contact Jasco support. Enjoy the convenience of controlling your Element TV with your GE universal remote!

FAQ’s

How do I connect my GE universal remote to my element TV?

Hold down the SETUP button while your remote’s red light flashes. After turning it on, let go of the SETUP button and check to see if the red light is still on. It can now be programmed as a result of this.

How do I set up remote to Element TV?

Replace the batteries in your remote control. While your TV is looking for your remote, press and hold the button on your remote for 10 seconds if it doesn’t pair with your TV. After pairing your remote, set up your TV according to the directions displayed on the screen.

Why is my element TV not working with remote?

Old batteries are the primary cause of Element TV remotes breaking down and not functioning. Additionally, there may be a break in the cable between the TV signals and the receiver. The problem will typically be resolved by changing the batteries, relocating any obstructions from in front of the TV, and resetting the remote.