GE Universal Remote CL3 Codes For Element TV

A GE Universal Remote CL3 is a handy tool to control your Element TV, especially if you’ve lost the original remote or want to streamline your entertainment setup. This guide provides a complete list of codes, clear instructions to program your remote, troubleshooting tips, and answers to common questions. All information is up-to-date as of June 2025, sourced from reliable websites, and written for easy understanding.

List of Codes

4-Digit Codes for CL3 Remotes

GE Universal Remote CL3 models, made after 2013, use 4-digit codes to pair with Element TVs. Below is a comprehensive list of codes gathered from trusted sources:

4111	1091
5361	5411
5421	2401
1651	1741
2891	5341
5471	1025

How to Identify Your GE Remote Model

To ensure you’re using the correct codes, confirm your remote is a CL3 model:

1. Open the battery compartment by removing the back cover.
2. Look for a white sticker inside.
3. Check for “CL3” or just “CL” with a 3. This indicates a CL3 model, which uses 4-digit codes.

How to Program Your GE Universal Remote

Step-by-Step Instructions

Follow these steps to set up your GE Universal Remote CL3 with your Element TV:

1. Confirm the Remote Model:
   • Check the battery compartment for the CL3 label, as described above.
2. Find the Code:
   • Refer to the list of 4-digit codes above for Element TVs.
3. Turn On Your Element TV:
   • Ensure the TV is powered on and ready.
4. Press and Hold the Setup Button:
   • Find the “Setup” button on your remote.
   • Hold it until the red light (usually on the power button) turns on, then release.
5. Press the TV Button:
   • Press and release the “TV” button. The red light will blink once and stay on.
6. Enter the Code:
   • Use the number keypad to enter a 4-digit code (e.g., 5421).
   • If the code is correct, the red light will turn off.
7. Test the Remote:
   • Point the remote at the TV and press the “Power” button.
   • If the TV turns off, the code works. If not, repeat steps 4–6 with the next code.

Programming Without Codes

If none of the codes work, try the automatic code search method:

1. Turn on your Element TV.
2. Hold the “Setup” button until the red light appears.
3. Press and release the “TV” button.
4. Press and hold the “Power” button (or “Play” for other devices).
5. When the TV turns off, release the “Power” button and press “1” to save the code.
6. Test the remote to confirm it works.

Troubleshooting

What to Do If the Codes Don’t Work

If none of the listed codes work, try these steps:

• Use the Code Search Method: Follow the automatic code search steps above.
• Check Batteries: Ensure the remote has fresh batteries.
• Clear Obstructions: Make sure nothing blocks the signal between the remote and TV.
• Verify Compatibility: Some Element TV models may not be fully compatible. Check your TV’s manual or contact Element support.
• Visit Official Resources: Find additional codes at byjasco.com.

How to Reset Your GE Universal Remote

To reset your remote to factory settings, as noted by SlashGear:

1. Hold the “Setup” button until the red light appears.
2. Press the “Mute” button once.
3. Press the “#0” key.

This clears all programmed devices, allowing you to start fresh.

Conclusion

Programming your GE Universal Remote CL3 for an Element TV is straightforward with the right codes and steps. This guide combines verified codes from multiple sources, clear instructions, and troubleshooting tips to ensure success. If you need codes for other devices, consider visiting our website. Share your experience or questions in the comments below!

FAQ’s