Chunghop DVD Universal Remote Codes & Program Instructions

by

Are you tired of juggling multiple remotes for your DVD player, TV, and other devices? A Chunghop DVD universal remote can simplify your life by letting you control everything with just one tool. This guide will walk you through clear, step-by-step instructions to program your remote—whether you have the codes or not. Plus, you’ll find helpful tips to make the process smooth and stress-free. Let’s get started!

Why Use a Chunghop DVD Universal Remote?

A universal remote cuts down on clutter and confusion. Instead of searching for the right remote for your DVD player or TV, you can use one device to manage them all. This guide focuses on programming your Chunghop DVD universal remote so you can enjoy your entertainment setup with ease.

Program Your Remote

Method 1: Without Codes (Auto-Search)

If you don’t have the code for your device, the auto-search method is a simple way to find it. The remote scans through codes one by one until it finds the right match. Here’s how:

  1. Turn On Your Device
    Switch on the device you want to control, like your DVD player or TV.
  2. Activate the Remote
    Press and hold the button for your device (e.g., “DVD” or “TV”) along with the “OK/SEL” button for 3 seconds. A small LED light will turn on, showing the remote is ready.
  3. Start the Search
    Point the remote at your device. Press the “CH+” or “CH-” button repeatedly. The remote will send a signal to turn the device off.
  4. Check the Code
    When the device turns off, press the “Power” button. If the device turns back on, the code works! Test it by changing channels or playing your DVD.
  5. Save the Code
    Press the device button (e.g., “DVD”) again. The LED will blink twice, meaning the code is stored.

Tip: Be patient—this method might take a few tries, but it’s worth it!

Method 2: With a Code (Manual Method)

If you have a code from the Chunghop instruction booklet, this method is quick and direct. Follow these steps:

  1. Turn On Your Device
    Power up the DVD player or TV you want to control.
  2. Select the Device
    Press the button on the remote for your device (e.g., “DVD” or “TV”).
  3. Enter Learning Mode
    Press and hold the “Setup” button until the LED flashes once. This means the remote is ready to learn.
  4. Input the Code
    Type the code from your instruction booklet using the number buttons.
  5. Test It Out
    Point the remote at the device and press the “Power” button. If the device turns off, the code is correct.
  6. Finish Up
    If it works, you’re done! If not, try another code from the booklet and repeat the steps.

Tip: Keep your instruction booklet handy—it’s your key to success with this method.

Method 3: With Code Search

No code? No problem! The code search method forces the remote to hunt for the right one. Here’s how:

  1. Turn On Your Device
    Switch on your DVD player or TV.
  2. Get Ready
    Press and hold the “Setup” button until the LED lights up.
  3. Enter the Search Code
    Type “9-9-1” on the remote. This tells it to start searching.
  4. Find the Match
    Hold the “Power” button and press “CH+” repeatedly until the device turns off.
  5. Lock It In
    When the device shuts off, press the “Setup” button again to save the code.

Tip: This might take a little longer, but it’s a great backup if other methods don’t work.

Chunghop Universal DVD Remote Codes List

DVD brandChunghop remote code
AIWA150 180
AIKO179
AKAI006
AKISHI181
AKUSTIC179 258
AMOI111 112 114 135 405 406 407
AUDIA298
AODELONG316
AONE299 358
APEX182
AUCMA382
AUDIOVOX183
AVLIGTH143
BBK018 021 027 028 033 048 078 091 094 099 145 287 312 361 362 363 364 370 371 374 376 395 396 397
BULANTE064 065
CAIXING088 095
CHANGHONG136 137 138
CLASSIC184 270 271
COBY185
CRYSTAL334
CYBERHOME186
DAEWOO383
DAYU086 087 187 188 189 190 191 192 193 194 267 279 325
DESAY026 074 117 300
DENON195
DIGIXMEDIA196
DVD016 019 261
DIHE070 077 107 317
DINGTIAN127
F&D285
ELEKTRA192 197
FISHER233 262
FUSSION198
GE231
GEWANG328
GIEC089 292 294 295 296 310 322 340 341 342 343 344 345 372
GVG289 290
GO VIDEO199 200
GPX201
HAIER116 146
HAOJI068
HARMAN/KARDON276
HYUNDAI085 348
HIMAGE125
HISENSE134 143 311
HITACHI202
HITER089
HUABAO029 061 062 063 302
IDALL128 384
JINGEWANGPAI031 283
JINGWEI011
JUGAO318
JVC045 203 151 275
KENWOOD075 204 205 206
KETAI030
KONKA139 207
LAFAYETTE225
LASONIC208 209
LEPON385
LG008
LINITRON241
LONGZHIPAI284
MALATA002 009 023 024 073 146 147 151 297 313 398 399 400 401 402 403 404
MAJESTIC210 265
MARANTZ211 212 213 227
MEGA TANSS214
MTB218 219
MITSUBISHI215
MITSUI216 217 269
MITZU179 251
NAKAMICHI220
NAPA221 277
NINTAUS003 035 071 079 080 081 082 090 093 129 130 291 320 322
NORCENT222
OKON072
ONKYO043 223 224
PANASONIC014 204 273 274
PAIGAO327
PANDA036 051 052 053 102 105
PHILCO225 226 263 266 272
PHILIPS012 143 152 153 154 227 264
PHILIPS KARAOKE228
PIONEER044 229 355
POWER SOUND179
PROSONIC252
QISHENG005 037 092 098 101 282 305 306 307 308 323 331 365 366 367 368 369 373 375 377 378 379
RCA230 231 386
ROYAL225 272
SAMSUNG004 006 017 049 104 149 202 232 266
SANSUI013 046 351 353
SANYO233 234
SAST011 020 038 059 060 076 140 142 288 389 408
SHARP235 236 237
SHENGLI349
SHERWOOD319
SHINCO001 010 108 388 390
SHUMALING036
SKYWORTH-RGB022 025 032 034 058 096 097 100 119 121 293 301 314 321 346 347 359 360 391 392
SMC238
SONASHI304
SONICO259
SONY040 042 177 178 260 354
SOUND TRACK257
SOWA155
STAR118
SUPERSONIC225 239 272
SVA108
TCL000 015 039 054 055 120 315 393 394
TEAC240
THOMSON083 230
TIANLI131
TSINGHUA056 057 309 352
TOP TEC241
TOSHIBA041 069 242 243
TP356
UNIREX244
UNITRON241
VCD2245
VICTOR047 084 103
VIDEO CD253 254 255 256
VIFA050
VOX246
WANBAO296
WANYAN126 146
WEGA TRANSS278
XIANPAI070
YAMAHA227 247
YAMAKAWA248
YISHANG357
YMT303 304
YOUBISHEN124
YUXING115 156
ZONDA249 250
OTHER BRANDS007 016 019 122 123 132 133 157 106 109 141 110 113 144 148 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 245 261 280 281 324 329 330 332 381 387 409 410 411 412 413 414 415 416 417

Troubleshooting: What to Do If Your Remote Stops Working

If your Chunghop remote isn’t responding, try these fixes:

  • Check the Batteries
    Take out the batteries, press any button to clear leftover power, and put in fresh ones. Make sure they’re placed correctly (+ and -).
  • Reset the Remote
    Remove the batteries, press a button to discharge it, then put the batteries back in. Press “2” and “8” together within 6 seconds. The LED should blink twice. Then type “9-8-1”—the LED will blink four times to confirm the reset.
  • Test the Signal
    Point the remote at your device and press “Power.” If it doesn’t work, repeat the programming steps.

Conclusion

Programming your Chunghop DVD universal remote doesn’t have to be hard. Whether you use the auto-search, manual code, or code search method, you’ll soon have full control of your DVD player and other devices. Say goodbye to remote clutter and hello to a simpler entertainment setup!

Need more help? Check your instruction booklet or leave a comment below. Happy watching!

Read Also: how to connect a universal remote to a sanyo tv

FAQs

How do I fix my DVD remote that is not working?

Press any key on the keypad to release any stored current, then take the batteries out of the remote control. Replace the batteries with new ones or test the batteries to ensure they are both fully charged, if possible. Put the remote control’s batteries back in the right place.

How do I reset my old universal remote?

Press a button to completely discharge the remote after removing the battery. Replacing the battery should cause the LED to blink twice. Within 6 seconds, simultaneously press the numbers 2 and 8; the LED should then flicker twice. The LED will flicker four times when you enter the code 9 8 1.

Leave a Comment