GE Universal Remote CL5 Codes For Element TV

Hey there! Lost your Element TV remote? No problem! Your GE Universal Remote CL5 can control your TV with the right code. GE Universal Remotes are great for managing multiple devices, like TVs, DVD players, and cable boxes, with just one remote. This guide focuses on programming your GE Universal Remote CL5 for an Element TV. We’ve gathered a list of codes and clear steps to help you set it up quickly. Let’s dive in!

Table of Contents

Finding Your Remote Model

Before programming, confirm your remote is a CL5 model. Open the battery compartment by removing the batteries. Look for a sticker inside with the model number, such as CL5. This step is key because different GE remote models use different codes. If you see CL3, CL4, or CL6, you’ll need codes specific to those models.

List of GE Universal Remote CL5 Codes for Element TV

Below is a table of 4-digit codes for programming your GE Universal Remote CL5 to work with Element TVs manufactured after 2019. These codes were compiled from trusted sources. Since not all codes work for every TV, try each one until you find the right match.

5471	5421
6171	2401
5361	5841
1741	5831
1651	5341
2891	1091
6021

How to Program Your GE Universal Remote CL5 for Element TV

Follow these steps to program your GE Universal Remote CL5 for your Element TV. Make sure your TV is powered on before starting.

Find the Setup button on your GE Universal Remote.
Press and hold Setup until the red light on the remote stays lit.
Release the Setup button.
Press and release the TV button.
Enter a 4-digit code from the table above using the number buttons.
Check the red light. It should turn off after entering the code.
Test the remote. Press the Power button. If the TV turns off, the code works. If not, repeat the steps with the next code.

Troubleshooting Tips:

Wrong model? Double-check that your remote is a CL5 model.
Code not working? Try each code in the list. Some Element TVs may respond to only one specific code.
Still no luck? Your TV might not be compatible, or you may need to reset the remote (see below).

Additional Tips

Here are some extra tips to ensure your GE Universal Remote CL5 works smoothly with your Element TV:

Resetting Your Remote: If the remote isn’t responding, reset it to factory settings:
- Hold the Setup button until the red light comes on.
- Press the Mute button once.
- Press the 0 button.
Controlling Other Devices: Your GE Universal Remote CL5 can also control DVD players, cable boxes, soundbars, and more. Find codes for other devices on codes by device.
Auto-Code Search: If none of the codes work, some GE remotes offer an auto-code search feature. Check your remote’s manual or visit wikiHow for instructions.
Compatibility Check: Most Element TVs work with GE Universal Remotes, but older models may require different codes. Confirm your TVs manufacture date if possible.

Conclusion

Programming your GE Universal Remote CL5 for your Element TV is easy with the right code and steps. This guide provides a reliable list of codes and clear instructions to get your remote working. If you run into issues, try resetting the remote or checking compatibility. Have a code that worked for you but isn’t listed? Share it in the comments on Urclist.site! Enjoy the convenience of controlling your Element TV with your GE Universal Remote.

FAQ’s

How do I connect my GE universal remote to my element TV?

Press and hold the SETUP button on your remote control until a red light appears. Release the SETUP button after it is on, and then check to see if the red light is still on. This shows that it is prepared for programming.

How do you connect a remote to a element?

Replace the batteries in your remote control. While your TV is looking for your remote, press and hold the button on your remote for 10 seconds if it doesn’t pair with your TV. After pairing your remote, set up your TV according to the directions displayed on the screen.

Will universal remotes work on all tvs?

Your universal remote should function with your smart TV as long as it contains an infrared sensor (or whatever connection type your remote uses, like Bluetooth or Wi-Fi). However, some universal remotes can only operate the power, volume, and channel up/down buttons on your TV.