Using a GE Universal Remote CL5 with your Roku TV simplifies your entertainment setup by letting you control your TV with one device. This guide provides the specific codes for the CL5 model and clear instructions to program it for your Roku TV. Whether you own a standard Roku TV or a brand like Hisense, Insignia, or TCL, this article covers everything you need to get started.
GE Universal Remote CL5 Codes for Roku TV
Below is a table of 4-digit codes for programming your GE Universal Remote CL5 to work with various Roku TV brands. If your TV brand isn’t listed, start with the general Roku TV codes.
| 6171 | 6251 |
| 6001 | 6381 |
| 2891 | 1741 |
How to Program Your GE Universal Remote CL5 to Roku TV
Follow these steps to program your remote:
- Find the Code:
- Check the table above for the 4-digit code matching your Roku TV brand.
- Turn On Your TV:
- Ensure your Roku TV is powered on and displaying the home screen.
- Enter Setup Mode:
- Press and hold the “Setup” button on your GE Universal Remote CL5 until the red light turns on. This light is usually at the top or on the power button.
- Input the Code:
- Use the number buttons to enter the 4-digit code. If the code is correct, the red light will turn off.
- Test the Remote:
- Point the remote at your TV and press the power button. If the TV turns off, the remote is programmed. If not, repeat steps 3-4 with the next code.
Troubleshooting
If your remote doesn’t work after programming, try these solutions:
- Code Issues:
- Double-check the code entered.
- Try another code from the list for your TV brand.
- Use the general Roku TV codes (6171, 6001) if your brand isn’t listed.
- Remote Functionality:
- Ensure the remote is pointed directly at the TV.
- Check the batteries and replace them if weak.
- Confirm your remote is the CL5 model by checking the label in the battery compartment.
- Limited Functionality:
- Some codes may only control basic functions like power or volume. Try other codes for full control.
- Visit Jasco Universal Remote Codes for additional codes or support.
- Still Not Working?:
- Refer to the remote’s manual or contact Jasco support at (800) 654-8483, available Monday-Friday, 7 AM-6 PM CDT.
Additional Tips
- Confirm Your Remote Model: Open the battery compartment to verify your remote is CL5. Other models like CL6 may use different codes.
- Programming Other Devices: You can program your GE Universal Remote CL5 for other devices like soundbars or DVD players using similar steps and appropriate codes.
- Official Resources: For the latest codes or manuals, check Jasco Universal Remote Codes or Roku Support.
- Roku Streaming Devices: This guide focuses on Roku TVs. For Roku Streaming Sticks or other devices, codes may differ. Check the Jasco website for specific codes.
Conclusion
Programming your GE Universal Remote CL5 for your Roku TV is straightforward with the right code and steps. Use the codes provided, follow the instructions, and troubleshoot if needed. Enjoy the convenience of controlling your Roku TV with one remote!
For further assistance, visit our site urclist.site.
FAQ’s
Can I pair any remote to Roku TV?
As long as you have one of the supported remotes, connecting a universal remote to your Roku is typically a simple. To be compatible with the options stated on Roku’s remote control compatibility page, your remote’s model name and number must match. Check the remote’s front and back to find the model.
How do I program a GE universal remote to a Roku?
Make sure your Roku is connected to your TV and turn it on. Once the indicator light has turned on and is steady, push the power button, then press and hold the Setup button on your GE universal remote control. The button for the device you want to operate Roku TV must be pressed and then released.
Why won’t my universal remote connect to my Roku?
You must remove the batteries, unplug and then replug your Roku device, replace the batteries, and then hold down the reset button until the remote re-pairs in order to reset your remote.